TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
The purpose of these forums is to discuss TurboCAD.  Please keep the discussion of other products to compatibility issues or how the other software’s can be used with TurboCAD.


Diameters vs radii in Selection Window
Read 899 times
* April 01, 2020, 07:00:10 AM
When I go to alter a hole or cylindrical hole size it always shows a radius to alter the size. I would much rather see a "Diametrical Size" to alter. As we are really dealing with diameters drill sizes, reamers, hole diameter sizes etc. I find it puzzling that in the selection info window it asks for a radius to alter the size? Each time I have to change a hole size I have to go figure the radius of the hole size.

Logged


* April 01, 2020, 08:53:17 AM
#1
I agree.

Henry H

Logged


April 01, 2020, 08:56:08 AM
#2
When I go to alter a hole or cylindrical hole size it always shows a radius to alter the size. I would much rather see a "Diametrical Size" to alter. As we are really dealing with diameters drill sizes, reamers, hole diameter sizes etc. I find it puzzling that in the selection info window it asks for a radius to alter the size? Each time I have to change a hole size I have to go figure the radius of the hole size.

Assuming you mean the size of the diameter; why is that a problem?
The radius is just half of that ... or, have I misunderstood?

Logged
Regards Tim

You can design without engineering, but you cannot engineer without design.
Using Win 10 with Designer 2017-2020 and TurboCAD Pro. Plat. 2018-2020 + Lightworks (64-bit versions) + AnimationLab 5.2.
Windows 10 Pro (1909) 64-bit


* April 01, 2020, 09:13:28 AM
#3
Perhaps, we could have both; radius and diameter?

You may be asking too much!

Logged
DonCW
2017 Pro with Light Works Plug in
2018 Platinum
2020 Platinum

Windows 10
There's so much to learn and not much time left to learn it.


April 01, 2020, 09:25:11 AM
#4
Perhaps, we could have both; radius and diameter?

You may be asking too much!

Programatically, the radius dimension can 'kill two birds with one stone'; I'm guessing. 
It can be used to alter both the radii, fillets, for example, and/or a diameter, whereas the latter, is exclusive to the diameter.

Logged
Regards Tim

You can design without engineering, but you cannot engineer without design.
Using Win 10 with Designer 2017-2020 and TurboCAD Pro. Plat. 2018-2020 + Lightworks (64-bit versions) + AnimationLab 5.2.
Windows 10 Pro (1909) 64-bit


April 01, 2020, 05:51:18 PM
#5
I wonder what happens if you enter dia/2 in that Radius field.
It works in the Inspector Bar.
« Last Edit: April 01, 2020, 05:53:24 PM by Alvin Gregorio »

Logged
Alvin Gregorio
Intermittent TurboCAD user since yr. 2000 (ver6.5).  No formal CAD Training.
---TurboCAD: V21PP; V20.2PP; V19DL; V11.2Pro; Windows-7-Pro/64-bit; Intel-Core-i3 CPU; 2.27ghz; 4GB RAM; Intel HD Graphics (CPU based)


April 01, 2020, 05:55:41 PM
#6
I wonder what happens if you enter dia/2 in that Radius field.
It works in the Inspector Bar.

Yeah, it works for me in my version-21PP.

Logged
Alvin Gregorio
Intermittent TurboCAD user since yr. 2000 (ver6.5).  No formal CAD Training.
---TurboCAD: V21PP; V20.2PP; V19DL; V11.2Pro; Windows-7-Pro/64-bit; Intel-Core-i3 CPU; 2.27ghz; 4GB RAM; Intel HD Graphics (CPU based)


* April 01, 2020, 07:18:57 PM
#7
I wonder what happens if you enter dia/2 in that Radius field.
It works in the Inspector Bar.

Yeah, it works for me in my version-21PP.

Which Radius field, Alvin?

EDIT: I see: in the Selection Info palette. But it's really flakey in my 2019PP; sometimes it works and sometimes it does not. Haven't found the key.

Henry H
« Last Edit: April 01, 2020, 07:30:30 PM by Henry Hubich »

Logged


April 01, 2020, 07:41:45 PM
#8

Which Radius field, Alvin?

EDIT: I see: in the Selection Info palette. But it's really flakey in my 2019PP; sometimes it works and sometimes it does not. Haven't found the key.

Henry H

Works for me in V21PP-- Circle, Cylinder, Hole.  Inspector Bar-- initially or upon edit; Selection Info Palette, Radius field in Metrics or other applicable radius value field.

Logged
Alvin Gregorio
Intermittent TurboCAD user since yr. 2000 (ver6.5).  No formal CAD Training.
---TurboCAD: V21PP; V20.2PP; V19DL; V11.2Pro; Windows-7-Pro/64-bit; Intel-Core-i3 CPU; 2.27ghz; 4GB RAM; Intel HD Graphics (CPU based)


* April 01, 2020, 07:49:34 PM
#9
Works only rarely with a Circle for me in 2018PP and 2019PP and 2017 Deluxe. Does it work consistently for you, Alvin?

Henry H

Logged


April 01, 2020, 08:22:58 PM
#10
Works only rarely with a Circle for me in 2018PP and 2019PP and 2017 Deluxe. Does it work consistently for you, Alvin?

Henry H

10 out of 10 times, Yes.  Circle, Cylinder, Hole

Logged
Alvin Gregorio
Intermittent TurboCAD user since yr. 2000 (ver6.5).  No formal CAD Training.
---TurboCAD: V21PP; V20.2PP; V19DL; V11.2Pro; Windows-7-Pro/64-bit; Intel-Core-i3 CPU; 2.27ghz; 4GB RAM; Intel HD Graphics (CPU based)


* April 02, 2020, 11:44:40 AM
#11
Weird. For me it works consistently only if I enter integers. If I want a diameter of .375, for example, I have to type 375/1000 375/2000 in the Radius field. Makes me think there's a setting somewhere that controls this,  but I can't think what/where it would be.

Easier to use the Size fields in the IBar.

Henry H
« Last Edit: April 02, 2020, 12:02:28 PM by Henry Hubich »

Logged