TurboCAD Civil & Civil Design Suite New builds are available both 32/64 bits at below links, Contains all the bugs reported in previous build in addition to other fixed bugs reported by QA and still few bugs are in progress related to TurboCAD Civil 2017:

Civil Design Suite:
32 bit: http://downloads.imsidesign.com/Builds/11.10.2017_19.00.11_x86.rar
64 bit: http://downloads.imsidesign.com/Builds/11.10.2017_19.00.11_x64.rar

TurboCAD Civil 2017
32 bit: http://downloads.imsidesign.com/Builds/tc24-0-64-4-%2811.30.2017_00.15.09%29.rar
64 bit: http://downloads.imsidesign.com/Builds/tc24-0-64-4-%2811.30.2017_02.09.41%29x64.rar

Please let me know in case of any problem in these builds!

This seems to be an Frenc Version ??

TurboCAD Civil 2017
64 bit: http://downloads.imsidesign.com/Builds/tc24-0-63-5-%2811.24.2017_02.05.09%29x64-1.rar

Torfinn

Both the 32- and 64-bit versions of TurboCAD Civil are not found on the server.


Jeff

Dear Jeff & Torfinn,

Pardon me for inconvenience caused. Very strange problem occurred at downloads server. Everything is perfect now.
Please try now and let me know.

Hello, Zunair:

The 64-bit versions of each have now downloaded with no problem.


Jeff

No problem Zunair

Cant use it anyway , Beta snaks dont work on this versions;)

Torfinn

Thanks Zunair

That was same SNAK's as i had before, it works on the suite but i got an errormessage about the temporary instal path, see Attached.
Take away the first part, change C with D where i have my TC program's and it install fine.
But that can also bee because i already have that version on my pc, but after uninstall it, i still get the same warning when i should install the new one,  after as told above, ok
//******************
TurboCAD Civil 2017
64 bit: http://downloads.imsidesign.com/Builds/tc24-0-64-4-%2811.30.2017_00.15.09%29.rar
32 bit: http://downloads.imsidesign.com/Builds/tc24-0-64-4-%2811.30.2017_02.09.41%29x64.rar
//***********************
Here the 32 and 64 bit are switched, txt compare to link

I put the Suite in Deluce, so will see during the evening how it go's.

About the SNAKS you put out, this is in the puplic forum

Torfinn

Dear Torfinn & Jeff,

PLAV is for the plugin, not for the full Deluxe-plus-Civil-plugin installer. PLAV should continue to work for the 2017 version of the Civil Design Suite plugin. For the full installer, TCKT, TCKU snaks should also continue to work. So, be sure you are using the right SNAK for the right installer.
TCxx are TURBOCAD serial numbers; PLxx are PLUGIN serial numbers.
Please use following:

Civil Design Suite:
Ser.No: PLAV-2760-0429-2310-3302     
Act: 3D73-D093-CF71-8C66

TurboCAD Civil 2017:
Ser.No: TCKU-3019-0418-3310-8346
Act: E052-9087-68BA-8C18

Please let me know if you still need more information!

Hi Zunair

Thanks, install now work like a charm
I did try the tcku first time also, but maybe that was on the Design Suite, dont remember anymore

Anyway it still have the bad habit of "jumping out" from the program when i make a road, but we see when i work with it a bit more.

Torfinn

Hi Zunair

The New version seems to be very stabile, attached show a road, 1 km long

Torfinn

TurboCAD Civil & Civil Design Suite New builds are available both 32/64 bits at below links, Contains all the bugs reported in previous build in addition to other fixed bugs reported by QA and still few bugs are in progress related to TurboCAD Civil 2017:

Civil Design Suite:
32 bit: http://downloads.imsidesign.com/Builds/11.10.2017_19.00.11_x86.rar
64 bit: http://downloads.imsidesign.com/Builds/11.10.2017_19.00.11_x64.rar

TurboCAD Civil 2017
64 bit: http://downloads.imsidesign.com/Builds/tc24-0-64-4-%2811.30.2017_00.15.09%29.rar
32 bit: http://downloads.imsidesign.com/Builds/tc24-0-64-4-%2811.30.2017_02.09.41%29x64.rar

Please let me know in case of any problem in these builds!

I take it the 32 bit TurboCAD Civil 2017 is a x64 program?

Yes it is Kevin, it is the 32/ 64 in front that is wrong, and the ending of link it will show correct, but can be confusing, i know by experience. or most likely, i am confused

Torfinn

Dear Kevin & Torfinn,

Please check again!

Hi Zunair

Thanks, now it look correct, i dont care to download as i did see where i go wrong first time and have both 64 installed already.

Torfinn

You are welcome Torfinn.

Just installed the TurboCAD Civil 2017 update and it installed into TurboCAD 2017 Deluxe, I presume it should have installed into TurboCAD 2017 PP.

What did I do wrong?

If you want it on PP you installed the wrong edition
The plugin you can choose PP or DL, so just download the other one and un instal the old and reinstall the new.
You can see it on the filesize what is what, plugin is a small file.

Torfinn

Torfinn thanks for the heads up.

Hi Zunair

The New version seems to be very stabile, attached show a road, 1 km long

Torfinn

Hi,

That looks awesome,  is the file imported from a photogeometry program?

Hi,

Is there likely to be turbocad civil design suite released in 2019.  Im interested in purchasing, however I want some tutorials.  Are paid tutorials available for say road design?

Regards

Richard

""...………...
Hi,

That looks awesome,  is the file imported from a photogeometry program?
[/quote]

No, the terrain is made from part of a pointfile, and material on it is a pic of moss scaled up about 50 000.
The road is after a 2 D path and it's Civil that make it all.

There are no tutorial of Civil, but there is info about how it work in Civil's helpfile i also think to remember there are a link to it out here at the forum someplace.

Torfinn

Hi,

Just wondering if the import tool works now for geotiff import?

Hi,

Does import points from this website work with Geotiffs?

http://www.surfacemodeling.com/Products.htm