TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

What I do for a living
Read 1982 times
October 05, 2016, 07:26:44 AM
Hi ;D
        Just thought that I would let you see the sort of thing I do for work.

Arundel

Logged
Lenovo  Enhanced Experience 2.0
intel i5 2500
Windows 7pro
8g ram
Tc 2016 deluxe


* October 05, 2016, 07:46:31 AM
#1
Nicely done, Arundel. Brings back memories, 'cuz my father had an upholstering shop. About the only part of the craft I learned was how to sweep the shop.

Henry H
« Last Edit: October 05, 2016, 04:13:01 PM by Henry Hubich »

Logged


October 05, 2016, 07:54:09 AM
#2
Thanks Henry
                        I have the job of making up the frame and doing the cutting book and patterns for the mill,it's just now and then will over do the drawing a little.

Arundel ::)

Logged
Lenovo  Enhanced Experience 2.0
intel i5 2500
Windows 7pro
8g ram
Tc 2016 deluxe


* October 05, 2016, 10:55:20 AM
#3
Nice drawing...thanks for sharing!

Logged


October 06, 2016, 12:42:13 AM
#4
Looks very accurate.  Do you generate a Bill of Materials from the parts in your drawing?


Jeff


Logged
TC Pro Platinum 2019, 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1


October 07, 2016, 01:21:18 AM
#5
Hi Jeff
          Not a bill of materials using TC , but I do a book using a word program ( PagePlus) like the one attached.

Arundel

Logged
Lenovo  Enhanced Experience 2.0
intel i5 2500
Windows 7pro
8g ram
Tc 2016 deluxe