TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
When replying to a specific statement be sure to quote the previous post.

Print Border
Read 2207 times
* August 11, 2009, 08:06:46 AM
Hi

How do I switch off the print borderaround the viewport. I did switch off the Visible Box tick mark, but it is still there

[attachment deleted by admin]
« Last Edit: August 11, 2009, 08:31:33 AM by triplex »

Logged


* August 11, 2009, 09:16:50 AM
#1
Select the viewport, select properties, select Pen, change color to White.

John B.

Logged
John B.
TCv2019 Platinum
Windows 10 Pro 64 Bit
1 GB Hard Drive 16 GB RAM
AMD Radeon RX 580 Series


* August 11, 2009, 10:21:11 AM
#2
re: How do I switch off the print border around the Viewport.

While changing the color to white will work in Wireframe, you will want to use the $Invisible line style in a rendered viewport.


Logged
John R.

V17—V21, 2015—2019
Designer, Deluxe, (Professional, Expert, Basic), Platinum
RedSDK enabled
Windows 10 Pro (1903), 64-bit


* August 11, 2009, 11:05:10 AM
#3
Hi
it works in all except Adanced Render

Why ?

Tx

Logged


* August 12, 2009, 11:30:40 AM
#4
I did use the Invisible - still there - I just took a 1 mm White poly and traced it over - crook and take extra time but gets it to the finish line.

TX for the advice.

Logged


* August 12, 2009, 12:24:33 PM
#5
I did use the Invisible - still there - I just took a 1 mm White poly and traced it over - crook and take extra time but gets it to the finish line.

The only way I can get VP box to show (when it shouldn't) is to Save As PDF.
When Printing to PDF or an actual printer, I don't get a VP Box.

At least you found a workaround. :-)


Logged
John R.

V17—V21, 2015—2019
Designer, Deluxe, (Professional, Expert, Basic), Platinum
RedSDK enabled
Windows 10 Pro (1903), 64-bit