TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
When posting a problem be sure to include which version you are using.  Give as much information as possible.  If the problem is with a specific file be sure to attache it to your post.

Drafting palette
Read 4277 times
May 15, 2009, 03:14:06 AM
Depth option to section by line.
Have found this is desperately needed after first trial use of drafting palette,

and therefore concur to  Adam Marment's comment in the last forum
Date: April 21, 2009 03:54 PM
Author: Adam Marment
Subject: Give me a break...or two...or three...

I explode practically all drafting pallete objects, so I can manually stretch/shrink them, I've found no other way. I once attempted to use aligned viewports to create the effect, but that was a nightmare. I have seen mention of 'drafting object breaks' in a similar (but slightly more expensive CAD program), but it did say that you get only one break per object.

Unlimited breaks, and a depth option for the 'section by line' tool, would make the drafting pallette awesome.

Adam

http://forums.imsisoft.com/forums/Index.cfm?CFApp=200&Message_ID=478392

Logged
Alan.
Platinum 21. & Deluxe 21.
TC user since 1995. (version 3)


* May 15, 2009, 01:02:35 PM
#1
I have already started discussing this with our director of development.  No decision as of yet, but it is being investigated.

Logged


May 16, 2009, 02:48:40 AM
#2
Thanks Dave

Logged
Alan.
Platinum 21. & Deluxe 21.
TC user since 1995. (version 3)