TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
All posts discussing pricing or where to buy TurboCAD will be deleted.

Can't Find "JPG EXPORT SETUP"
Read 2266 times
June 09, 2009, 04:41:41 AM
I am too dumb to find where the JPG EXPORT SETUP, explained on Page 8 of the V16 User Manual, is.

The default value of the JPG output is 600 X 800. It can be increased up to 2000x2000, according to the manual.


Logged
Harry in Harrisburg
TC  21.2 Professional, Build 59.2.
Lenovo W530 Workstation LapTop
Processor Intel i7-3820QM 3.7 Ghz
16 GB RAM, NVIDIA Quadro K2000M Graphics

"There is never enough time to do it right, but always enough to do it over."


June 09, 2009, 06:42:12 AM
#1
Menu Bar, File, Save As..., Save as type: JPG, Setup...

Logged
Hardware: 2.67GHz Core I7-920, 18GB 1333 DDR3, Nvidia Gforce GT 220
OS: 64 Bit Windows 10 Home
Software: TC 2018.25.0.41.0 (64)
Setup: UI: Classic, Editing History: Off, Use Choice: Off, Native Draw: GDI


June 09, 2009, 06:53:05 AM
#2
Thanks, Winston!

Did I miss something, or was this somewhere in the manual?

Logged
Harry in Harrisburg
TC  21.2 Professional, Build 59.2.
Lenovo W530 Workstation LapTop
Processor Intel i7-3820QM 3.7 Ghz
16 GB RAM, NVIDIA Quadro K2000M Graphics

"There is never enough time to do it right, but always enough to do it over."


June 09, 2009, 07:04:18 AM
#3
Page 2 of the Help PDF.
« Last Edit: June 09, 2009, 07:23:10 AM by Winston Mitchell »

Logged
Hardware: 2.67GHz Core I7-920, 18GB 1333 DDR3, Nvidia Gforce GT 220
OS: 64 Bit Windows 10 Home
Software: TC 2018.25.0.41.0 (64)
Setup: UI: Classic, Editing History: Off, Use Choice: Off, Native Draw: GDI


June 14, 2009, 10:32:56 PM
#4
2000x2000 in V16?  I have set 16000x16000 in V15 (yes, it took a long time to render).


Jeff

Logged
TC Pro Platinum 2019, 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1


* June 15, 2009, 12:32:39 AM
#5
re: JPG set to 16000×16000

Yes, 16K×16K will work in V16, but with the same limitations found in previous versions of TurboCAD. You can't use Perspective or a multicolor (i.e. Graduated) Background. Attached is what I just got in V16; nice banded images at 16K.

2K×2K is a reasonable enough size for a Quality rendering, though you can go somewhat higher. Since JPG's will most likely be made from a Quality rendering using Perspective and a non-plain background, it's best to just mention a usable size instead of the maximum size. There's nothing worse than waiting 4 or 5 hours and all you get is a venetian blind.

John R.



[attachment deleted by admin]

Logged
John R.

V17—V21, 2015—2019
Designer, Deluxe, (Professional, Expert, Basic), Platinum
RedSDK enabled
Windows 10 Pro (1903), 64-bit