TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Remember to do a search before you ask a question!!!

TC 20.2 Pro. UV Mapping
Read 785 times
October 23, 2019, 11:06:41 AM
I am halfway there. 
And need to place different images on 4 sides of a box.
So far got it wright to place the 1st image using the UV Mapping tool.
When i attempt to place the 2nd different image on the adjacent side it puts the 1st image on.
See screen grab atached.
Your advice please ..


Logged


October 23, 2019, 02:46:33 PM
#1
I think, since you are using two separate Images for each of the sides (facets), you need to create a Material for each one and assign the appropriate Material to each facet via Properties.

I think.  I've barely done any of this stuff.

Logged
Alvin Gregorio
(mostly Residential Architectural 2D; no formal CAD Training; intermittent TurboCAD user since yr. 2000 [ver6.5])
---TurboCAD: V21PP; V20.2PP; V19DL; V11.2Pro; Windows-7-Pro/64-bit; Intel-Core-i3 CPU; 2.27ghz; 4GB RAM; Intel HD Graphics (CPU based)


October 23, 2019, 03:26:40 PM
#2
If you can use an image in two separate UV maps, then I never figured out how to do it.


Jeff

Logged
TC Pro Platinum 2019, 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1


October 23, 2019, 07:01:58 PM
#3
Thank you.

Logged


October 23, 2019, 08:08:56 PM
#4
If you can use an image in two separate UV maps, then I never figured out how to do it.
Jeff

You could use one image if the two images were joined and made into one in a photo editor first.

Here is a free tutorial I made at one time about UV wrapping. https://www.youtube.com/watch?v=ADCfunq_mE0


October 24, 2019, 07:59:36 AM
#5
Thank you Don, Jeff & Elvin.
I use the UV mapping to put the mesh onto the speakers as well.
« Last Edit: October 25, 2019, 09:50:54 PM by Up »

Logged


October 24, 2019, 08:03:08 AM
#6
Thank you Don, Jeff & Elvin. Very useful.
I use the UV mapping to put the mesh onto the speakers as well.


Very nice job Up.  Looks Great!

Logged
Alvin Gregorio
(mostly Residential Architectural 2D; no formal CAD Training; intermittent TurboCAD user since yr. 2000 [ver6.5])
---TurboCAD: V21PP; V20.2PP; V19DL; V11.2Pro; Windows-7-Pro/64-bit; Intel-Core-i3 CPU; 2.27ghz; 4GB RAM; Intel HD Graphics (CPU based)