TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
When posting a problem be sure to include which version you are using.  Give as much information as possible.  If the problem is with a specific file be sure to attache it to your post.

2015 Platinum
Read 905 times
* March 07, 2015, 10:45:52 AM
This is NOT an encouraging start, I d/l the 2015 Trial version and bought Don Cheke's Mini Vice tutorial. I've got as far as page 13 which is still in the setup of tools etc. and have a look at the attached. TC has crashed 4 times. Clicking on 'Display' causes another crash and that's as far as I've got.

Ideas please.

Logged
DonCW
2017 Pro with Light Works Plug in
2018 Platinum

Windows 10
There's so much to learn and not much time left to learn it.


March 07, 2015, 11:03:02 AM
#1
Sorry about this Don
RedSDK could be the culprit.
I have found that TC/RedSDK is not connecting very well with my GPU and found that changing my Anti-aliasing in the GPU has reduced my Crash count considerably.
The main part for me is the rendering and it just was not working correctly.  Now i am starting to get some good results using RSE sky and RSL Sky together.

Logged
Daz…

V2019 Plat 64bit, Lenovo P72 Laptop, Window 10 Pro for Workstations, Intel Xeon E-2186 CPU @ 2.90 Ghz (6 cores/12 threads), 32GB RAM, 512GB & 1TB SSD's, Nvidia P5200 c/w Max=Q Design GPU, Display UHD 3840 x 2160 pixels
TurboCAD user since V3 and Turbocad 3D V1.


March 07, 2015, 11:10:22 AM
#2
I am not sure what to suggest. I am using Windows 7 as well and have only had  the occasional crash with TC 2015.


* March 07, 2015, 01:29:22 PM
#3
After trying Repair and making no difference, a complete uninstall and re-install seems to have corrected the problem...for now.

Logged
DonCW
2017 Pro with Light Works Plug in
2018 Platinum

Windows 10
There's so much to learn and not much time left to learn it.