TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
When posting a problem be sure to include which version you are using.  Give as much information as possible.  If the problem is with a specific file be sure to attache it to your post.

CAD Work Available
Read 2562 times
October 14, 2009, 03:07:05 PM
If there is anyone in my geographical area who is interested in doing 3D modeling and 2D detail drawing work, I can put them in contact with someone needing these services.

I did check with Dave Taylor before submitting this, for appropriateness.

Harry Capper
Harrisburg, Pa
hcapper@verizon.net
« Last Edit: October 14, 2009, 03:09:54 PM by harryinhbg »

Logged
Harry in Harrisburg
TC  21.2 Professional, Build 59.2.
Lenovo W530 Workstation LapTop
Processor Intel i7-3820QM 3.7 Ghz
16 GB RAM, NVIDIA Quadro K2000M Graphics

"There is never enough time to do it right, but always enough to do it over."


* October 14, 2009, 05:54:34 PM
#1
If there is anyone in my geographical area who is interested in doing 3D modeling and 2D detail drawing work, I can put them in contact with someone needing these services.


I'm on the west coast of Canada and a long way outside of your geographical area, but can you elaborate on what sort of detailing work you're after,
architectural, mechanical, etc.

Don.

Logged
DonCW
2017 Pro with Light Works Plug in
2018 Platinum

Windows 10
There's so much to learn and not much time left to learn it.


* October 16, 2009, 01:20:43 AM
#2
If Belgium is not to far away,
I'm a freelance 2D/3D CAD/CAM and 3D animation designer .
see my portfolio on my website.
www.marc-systems.be

Greetings,
Marc
« Last Edit: October 16, 2009, 01:45:34 AM by marc_256 »

Logged
greetings from belgium (Pajottenland)
WIN 8.1/10 - x64
- TC 9 --> TC 16.2 / 52.0 pro Platinum
- AnimationLab 4.4 - MontageCenter 1.0
- CAM plug-in for v 16


October 16, 2009, 03:28:20 AM
#3
Marc and Don:

I have responded to both of you separately by e-mail.

The work could best be described as small mechanical devices. This fellow is an inventor who needs modeling for patent application sketches, and  detail drawings for his inventions, and also has need for someone to make prototypes for him.

Due to my limited time available and also that I am not up to speed on TurboCAD at this point, decided that it is not viable for me to do the work for him.

I have the feeling that he would prefer working with someone he could meet with face to face, at least on a periodic basis.

Logged
Harry in Harrisburg
TC  21.2 Professional, Build 59.2.
Lenovo W530 Workstation LapTop
Processor Intel i7-3820QM 3.7 Ghz
16 GB RAM, NVIDIA Quadro K2000M Graphics

"There is never enough time to do it right, but always enough to do it over."


October 16, 2009, 07:26:56 PM
#4
If there is anyone in my geographical area who is interested in doing 3D modeling and 2D detail drawing work, I can put them in contact with someone needing these services.

I did check with Dave Taylor before submitting this, for appropriateness.

Harry Capper
Harrisburg, Pa
hcapper@verizon.net

Harry.

Sent you an email concerning this.  Let me know if there is any interest.


Logged
Jon Coxwell, AIA
Windows Win 7x64
TC19,20 32 bit, 20,21,22 64 bit (Platinum)
RedSDK usually off  Win 10 pro

Save the Planet
Conserve & Recycle


* October 16, 2009, 10:27:04 PM
#5
Instead of commuting to PA, why doesn't the client describe what it is to a potential draftsman and maybe he can draw what he wants.  Don't forget a NDA.

John B.

Logged
John B.
TCv2019 Platinum
Windows 10 Pro 64 Bit
1 GB Hard Drive 16 GB RAM
AMD Radeon RX 580 Series