TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Interested in some really terrific mobile apps? Visit www.turboapps.com for details.

First angle and third angle symbols
Read 6929 times
October 09, 2009, 09:13:06 AM
Hi all.

Could anyone possibly tell me if there is anywhere on the web where I can find a first/third angle symbol that I can use with TC.

Thanks in advance.

Dave

Logged
Dave C
TC Pro V14.2 - TC 21 Platinum 64 Bit Build 22.3
Intel i-4770K 3.5GHz
120GB ssd 2TB hd
16GB memory
64bit Windows 7 Pro

www.ipernity.com/fizzyfitz


* October 09, 2009, 09:50:45 AM
#1
I think you looking for the Isometric and Dimetric views found in the View menu ("View /  Camera / Isometric" or "View / Camera / Dimetric"), when viewing your 3D objects. I haven't tried drawing an Iso or Dimetric view in 2D in eons; never was quite good at that.

Logged
John R.

V17—V21, 2015—2019
Designer, Deluxe, (Professional, Expert, Basic), Platinum
RedSDK enabled
Windows 10 Pro (1903), 64-bit


October 09, 2009, 11:24:19 AM
#2
Thanks for the quick reply John but I think you have misunderstood my question.

I am putting a drawing together and I need the symbol that shows the drawing is shown in a first angle projection.

Any help to find the 2D symbol for this would be greatly appreciated.

Regards

Dave


Logged
Dave C
TC Pro V14.2 - TC 21 Platinum 64 Bit Build 22.3
Intel i-4770K 3.5GHz
120GB ssd 2TB hd
16GB memory
64bit Windows 7 Pro

www.ipernity.com/fizzyfitz


* October 09, 2009, 12:32:00 PM
#3
Here ya go. I'd suggest that you trace this in TCad and save as a Symbol.

Henry H

[attachment deleted by admin]

Logged


October 09, 2009, 12:44:37 PM
#4
Cheers Henry.

You're a star.

Logged
Dave C
TC Pro V14.2 - TC 21 Platinum 64 Bit Build 22.3
Intel i-4770K 3.5GHz
120GB ssd 2TB hd
16GB memory
64bit Windows 7 Pro

www.ipernity.com/fizzyfitz