TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
When posting a problem be sure to include which version you are using.  Give as much information as possible.  If the problem is with a specific file be sure to attache it to your post.

Version 19.2 Deluxe: Door Openings and/or Styles
Read 1065 times
* March 05, 2013, 05:11:46 PM
Hello All,

In version 19.2 Deluxe:  When drawing 2D construction- drawings, what is the best way to get plain ol' Door Styles, like simple Door Openings that are Blocks that I created? (like available in Pro  ProPlatinum versions)

(a simple 2D Door Opening Block- which I would like to use in ver. 19.2 Deluxe somehow- is shown in the .png below)

-Alvin
« Last Edit: March 05, 2013, 05:22:18 PM by Alvin Gregorio »

Logged
Alvin Gregorio
(mostly Residential Architectural 2D; no formal CAD Training; intermittent TurboCAD user since yr. 2000 [ver6.5])
---TurboCAD: V20.2PP(57.0)[as of 3/12/15]; V19DL(54.2); V11.2Pro; Windows-7-Pro/64-bit; Intel-Core-i3 CPU; 2.27ghz; 4GB RAM; Intel HD Graphics (CPU based)


* March 05, 2013, 10:17:04 PM
#1
See "Inserting 2D Blocks in Walls" in the Help or the Wiki.

Logged
John R.

V17—V21, 2015—2019
Designer, Deluxe, (Professional, Expert, Basic), Platinum
RedSDK enabled
Windows 10 Pro (1803), 64-bit


* March 06, 2013, 09:37:38 AM
#2
See "Inserting 2D Blocks in Walls" in the Help or the Wiki.

Yes, that's what I'm looking for John.  As close as I'm going to get (in Deluxe) to the old Opening Tool in Pro TurboCAD versions.

Thanks much for the links John.  -Alvin

Logged
Alvin Gregorio
(mostly Residential Architectural 2D; no formal CAD Training; intermittent TurboCAD user since yr. 2000 [ver6.5])
---TurboCAD: V20.2PP(57.0)[as of 3/12/15]; V19DL(54.2); V11.2Pro; Windows-7-Pro/64-bit; Intel-Core-i3 CPU; 2.27ghz; 4GB RAM; Intel HD Graphics (CPU based)