TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

1/4 turn stairs in pro plat 19
Read 1264 times
* August 09, 2012, 01:57:52 PM
does anyone know if 1/4 turn stairs are working yet in pro plat 19?
ie. can you set the no. of rises to turn through?
i am trying to draw in 3d , 3 rises up then turn 90 deg in 2 rises(winders in uk) , then 7 rises straight
this has to be accurate as i have to make this in english oak (expensive timber)
any help would be greatly appreciated.



fustrated & using tc 18 pro plat


* August 12, 2012, 07:32:08 AM
I battled with these in 18 changing the turn type to 1/4 landing worked in 18

TC20 platinum
TC 2015 platinum
TC 2017 with lightworks

* August 13, 2012, 01:26:36 PM
Nope, still doesn’t work. See picture below.

"What do I know, I'm still learning"..
Windows 7 64 bit HP > 2019-2018-2017, TurboCad Platinum 21,20,19 and 18.Using LightWorks, Anilab lab 5.  HP all in one  23" Touch smart screen with Nvidia Geforce 210, open gl 3.3. Intel Core i5 ,2.27GHz,4 GB ram.

* August 20, 2012, 01:49:47 PM
thanks both.
it seems that tcad isnt developed for real world applications  ???