TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
The purpose of these forums is to discuss TurboCAD.  Please keep the discussion of other products to compatibility issues or how the other software’s can be used with TurboCAD.


My first render in the Gallery
Read 2780 times
* February 16, 2012, 12:08:19 PM
I thought I would share this with you all. This is my first render that I have posted on here.. All advise is appreciated. This is still a work in progress and I am just working on how to adjust the lights etc. This has all been done on 14.2 deluxe so I am limited on some things that can be done. Thanks Carroll

Logged
Carroll D. Peppersack
TurboCad 14.2 Deluxe
TurboCad 20 Plat


February 16, 2012, 01:33:33 PM
#1
Welcome to the forum Carroll.  What a lovely first render...you have some pleasing lines & curves and some nice effects in your lamp. Well done.

Gaz

Logged
The CAD man
Garry Wilson
Crips-CAD Creations
TC version 20 Pro Platinum + Animation Lab


February 16, 2012, 01:48:19 PM
#2
Great job on the lamp Carroll.


February 17, 2012, 06:20:34 AM
#3

Very good start Carroll.  Nice to see some older-type artifacts being created.

Advice?  My oil lamps have adjusters, for the wicks/s, which would be an authentic addition.

Regards Tim

Logged
You can design without engineering, but you cannot engineer without design.
Using Win 10 with Designer 2016/2017 and TurboCAD Pro. Plat. 2018/2019 + Lightworks (64-bit versions) + AnimationLab 5.2.


* February 17, 2012, 06:29:59 AM
#4
Thanks everyone for the kind words, I apprecate it. I am still working on it an like the wick adjustment knob. I will repost when I am finished. Again thanks. Carroll 

Logged
Carroll D. Peppersack
TurboCad 14.2 Deluxe
TurboCad 20 Plat


* February 17, 2012, 07:41:06 AM
#5
Nicely done Carroll. The effect of the light in the lamp seems very real
ARPI3D

Logged


February 17, 2012, 03:56:22 PM
#6
Good first render Carroll, base is a bit faceted but still nicely done.... :)

Logged
Daz…

V2019 Plat 64bit, Lenovo P72 Laptop, Window 10 Pro for Workstations, Intel Xeon E-2186 CPU @ 2.90 Ghz (6 cores/12 threads), 32GB RAM, 512GB & 1TB SSD's, Nvidia P5200 c/w Max=Q Design GPU, Display UHD 3840 x 2160 pixels
TurboCAD user since V3 and Turbocad 3D V1.


February 18, 2012, 01:19:24 PM
#7
Good start Carroll.

Logged
Dave C
TC Pro V14.2 - TC 21 Platinum 64 Bit Build 22.3
Intel i-4770K 3.5GHz
120GB ssd 2TB hd
16GB memory
64bit Windows 7 Pro

www.ipernity.com/fizzyfitz


March 12, 2012, 02:14:29 PM
#8
That's a really good start Carroll.

Logged
BradE [ dean3Design ]
Core i7-3930K CPU @ 4.20GHz, 32GB 1333 DDR3, FirePro V5900
TC 21 Platinum (64-Bit) Running on Win7 Pro SP1