TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Interested in some really terrific mobile apps? Visit www.turboapps.com for details.

Simple Extrude
Read 2693 times
* August 04, 2009, 06:50:39 PM
Why is it every time that I do a simple extrude of a close poly - the one side is left "open" ?
tx

Logged


* August 04, 2009, 07:03:35 PM
#1
That shouldn't happen. Can you post a file in which it does?

Henry H

Logged


* August 04, 2009, 07:36:36 PM
#2
As attached

[attachment deleted by admin]

Logged


* August 04, 2009, 07:47:35 PM
#3
As attached

Can't tell what caused the problem, because the drawing does not include the profile you extruded. But the object can be "solidified" by selecting it and going to Format|Create Solid|From Surface.

Henry H

Logged


* August 04, 2009, 08:42:38 PM
#4
Hi

With Profile - tx.

[attachment deleted by admin]

Logged


* August 05, 2009, 01:15:58 AM
#5
Too many nodes. You may have gone too far when creating the polyline. Use "Close" before you get to the end. You had the Start and Finish in the same place (as it should be), but there was also a third node in the same place that caused the hiccup. Once that was moved (deleted), the 3D object filled in.



[attachment deleted by admin]

Logged
John R.

V17—V21, 2015—2019
Designer, Deluxe, (Professional, Expert, Basic), Platinum
RedSDK enabled
Windows 10 Pro (1803), 64-bit


* August 05, 2009, 02:55:38 AM
#6
OK - tx - sensitive ?!

Logged