TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

When posting a problem be sure to include which version you are using.  Give as much information as possible.  If the problem is with a specific file be sure to attache it to your post.

Some Need Casters!
Read 2299 times
* March 27, 2011, 01:55:56 AM
I have done a caster in TurboCad pro17 it is nothing fancy nor what the machine can really do. I am just getting used to it and needed what I could not find without registering for something. I hope Turbocad as others have done opens up to symbols. Perhaps rough drawings yet enough for putting together that Frankenstien of an idea, can become a better mark. I am disabled and don't have a lot of extra cash...I don't mind being called a bit socialist...but it has to go around. Heck I know perpetual I did it yet got beat down. Yet I needed a caster and couldn't find one without pain. So here is a rough burn your own hole pattern, just shove it in there and see how it looks stitched so. Bolt and Nut not spec just raw and such but for Franky ways and fair. See Download again it is Pro 17 may not be so well for others. Regular A regular TCW drawing. Enjoy...boy my 17 don't like dealing with my 15; what pains.


* March 27, 2011, 11:31:29 AM

a post of your drawing as a jpeg to make it easier to see on the forum



* March 27, 2011, 11:52:27 AM
That's a well-done model and a sensible design.

Henry H


March 27, 2011, 07:28:45 PM
Can I pick these up at the Home Depot?  ;D

TurboCAD user since v3
 TurboCAD on flickr || My twitter ||

March 27, 2011, 09:50:44 PM
That's a nice model Mike.

BradE [ dean3Design ]
Core i7-3930K CPU @ 4.20GHz, 32GB 1333 DDR3, FirePro V5900
TC 21 Platinum (64-Bit) Running on Win7 Pro SP1

* March 27, 2011, 10:21:28 PM
Thanks, for the Jpeg idea Brock and effert....thanks for all the fine comments. It really makes it worth the effert.


March 28, 2011, 03:56:00 AM
thanks for shering