TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

Print to scale
Read 2359 times
* June 18, 2009, 11:29:59 AM
I've looked around and beat my head against the wall for a day no, figured I would ask for help.
Using 15.2 pro, I have an architectural drawing I want to print to scale. 1/4" = 1', size E sheet.

Also, I want to print grid lines on the drawing every 1/4".

I've gone around a few times setting the properties in model & paper space, just does not work the way I expect.



* June 18, 2009, 12:13:05 PM
Printing in TurboCAD can be confusing until you get it down, but it is very powerful from a presentation standpoint.  I would recommend http://www.turbocad.com/TurboCAD/TurboCADforWindows/Training/EssentialPrintingToolsTechniquesforTurboCAD/tabid/900/Default.aspx

If you need it immediately you can find it on the www.cadcourse.net as a download.
You might also look into his full training bundle for the best deal.