TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
When replying to a specific statement be sure to quote the previous post.

Error Message
Read 1564 times
* March 06, 2010, 11:57:45 AM
Can anyone tell me what this message means. I get it each time i save the file.
AcDbTextStyleTableRecord(49A8). An invalid Scale factor 3812.97 not in range was found. Validation: 0.01..100. Replaced by 1.
AcDbTextStyleTableRecord(49AB). An invalid Scale factor 132.41 not in range was found. Validation: 0.01..100. Replaced by 1.
AcDbTextStyleTableRecord(49B6). An invalid Scale factor 990607 not in range was found. Validation: 0.01..100. Replaced by 1.
41104 objects audited
Total errors found during audit 3, fixed 3
Thanks for the help
« Last Edit: March 06, 2010, 02:26:26 PM by geniek6 »

Logged


March 06, 2010, 03:36:14 PM
#1
It does seem odd that this happens every time you save this file, because the messages say that three invalid Scale factors are being replaced, so they shouldn't cause the error the next time.

Does this only happen with this one file?  What happens if you create a new file, put some random objects and text in it, then save?

Jeff

Logged
TC Pro Platinum 2019, 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1


* March 06, 2010, 06:01:03 PM
#2
Does this only happen with this one file?  What happens if you create a new file, put some random objects and text in it, then save?

I tried that and no error. So it's just this one.

Logged


March 06, 2010, 06:20:08 PM
#3
Okay, then you have an object (or three) that has to be found and fixed.

The error message indicates that the definition for some of the Text in a Table is bad, so I'm assuming you created a Table.

I don't have any experience with Tables.  I inserted a blank one, but didn't find anything about scaling text (although there was a Size entry).

Set to Selection Info under the View menu and click on the Table in your drawing.  At the right, expand the Table Style entry and the Data, Header & Title entries under it.  Check if the Test Height values are outside the range of 0.01 to 100.

Jeff

Logged
TC Pro Platinum 2019, 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1