TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
When posting a problem be sure to include which version you are using.  Give as much information as possible.  If the problem is with a specific file be sure to attache it to your post.

TC hangs on opening "open" dialog every time after saving an STL file once
Read 1033 times
* December 03, 2019, 06:26:52 AM
Launch TC
Draw 3D object and save it in STL format
Close file and go to File > Open
TC hangs when trying to select file.

Close TC and restart it
TC hangs every time on trying opening the Open dialog.

Solution:

It is Windows 8 & 10 issue.
The workaround to avoid issue on the computer (do it once):
Open any STL file by program that is specified by default for the STL extension once (mouse double click on file).

Logged


December 03, 2019, 09:20:30 AM
#1
Thank you Ehtisham.
I tried this, and, after a fashion, what you describe happens.   :(
At least the solution works, which beats having to remove TC and reinstall.   :)
Will this be fixed, any time soon?

Regards Tim

Logged
Regards Tim

You can design without engineering, but you cannot engineer without design.
Using Win 10 with Designer 2016/2017 and TurboCAD Pro. Plat. 2018/2019 + Lightworks (64-bit versions) + AnimationLab 5.2.
Windows 10 Pro (1909) 64-bit