TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

ui interface
Read 1563 times
* October 31, 2019, 10:23:50 AM
can not open ribbon,cad course etc. ui interface i copied over it in the wrong place.  Using platinum 2019 version 26   34.1 can it be recovered without reinstall

Logged


* October 31, 2019, 11:43:17 AM
#1
Hi Roger
Have you tried Workspace Customize then load from to install your UI Interface.


Warren

Logged


* October 31, 2019, 01:19:00 PM
#2
Look in the "ProgramData" folder.

C:\ProgramData\IMSIDesign\TurboCAD 2019\x64\TurboCAD 2019\Config\Platinum

Remember to copy both files, such as; "Ribbon.xcfg" and "Ribbon.xml".

Logged
John R.

V17—V21, 2015—2019
Designer, Deluxe, (Professional, Expert, Basic), Platinum
RedSDK enabled
Windows 10 Pro (1903), 64-bit


* November 01, 2019, 12:40:33 PM
#3
Thanks john for your reply after i copy the two files where do i paste them or what next sorry to bother i can see many use your knowledge.

Logged


* November 01, 2019, 12:57:28 PM
#4
They go into 2019's "Config" sub-folder. The easiest way there is through the program. Go to "Tools / Customize—›Options" page and click on the "Browse" button (address below). That will open "Windows Explorer" to the folder that contains the configurations that show up on the "Load From" list. Paste the copied files there.

C:\Users\your User name\Documents\TurboCAD 2019 x64\Config\Platinum

Logged
John R.

V17—V21, 2015—2019
Designer, Deluxe, (Professional, Expert, Basic), Platinum
RedSDK enabled
Windows 10 Pro (1903), 64-bit