TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
When posting a problem be sure to include which version you are using.  Give as much information as possible.  If the problem is with a specific file be sure to attache it to your post.

Getting the printed image directly to JPEG
Read 442 times
January 30, 2019, 10:46:35 AM
I have bothered many of you previously trying to get a high quality image from the display using a screen capture program called FastStone Capture. the problem is that the display represents diagonal lines, circles, etc. as jagged. However, the printout from TurboCAD is perfect and adequate for my needs. Hence I have merely scanned the printed copy on my HP Officejet printer and saved it as a JPEG file and used it in my Word or Publisher document. Works great. But, is there a way to get the JPEG file directly from TurboCAD, Version 19, Pro Platinum as this would eliminate me having to print and scan the image?

Logged
Erik


* January 30, 2019, 11:10:23 AM
#1
Yes, Save as >> .jpeg

Torfinn

Logged
V18, V19, V20, V21, 2015/ 16/ 17/ 18 Pro. Platinum
Deluxe V20, V21, 2015/ 16/ 17
RedSDK enabled
Windows 10 Home Premium 64 bit, 32 GB
NVIDIA Geforce GTX 780m, 1 GB


January 31, 2019, 03:23:49 AM
#2
After selecting the JPG file type under Save As, be sure to enter Setup to specify the number of pixels for Width and Height.

You can experiment with JPEG quality factor, Output Range, Quality and Layout.

Tile Area should be set to an integer larger than Height * Width / 1,000,000.


Jeff

Logged
TC Pro Platinum 2019, 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1