Here's a zip file with a drawing of 3 different doors. The "two" didn't sink in until I had made a 4 panel door. You can Edit the Muntins option and change the "Lights Wide" to "1".
To get the "Glass" to show in a Door, you need to make a "Profile Style" that will define where to punch a hole in the door. One 2D rectangle will be the Boundary Profile (the outside of the door) and one or more closed 2D polylines will define openings where the glass/wood panel will show through. That "Profile Style" is applied to the "Door Style". Then you can click on the "Muntins" value to Edit those parameters. Is this a single door with two glass panels or double doors with a single pane each? (Pix 04)
The other doors just used a Profile Styles and skipped the Muntins. Lots of ways to skin this cat. :-)
Unzip the Zip file to its own folder and open the TCW file. The extraneous stuff are files you might need for rendering.
To post files in the Forum, click on "Attachments and other options" below the Reply window, then click on the "Browse" button.
« Last Edit: January 14, 2019, 02:57:41 PM by John R »
Designer, Deluxe, (Professional, Expert, Basic), Platinum
Windows 10 Pro (1803), 64-bit