Keyshot rendering integration would be awesome.

https://www.youtube.com/watch?v=taFGq2Qhr60

Here is how the keyshot works with solid works:
https://www.youtube.com/watch?v=v9w7gZCNnBk

+1 for KeyShot integration

Also I'd like to see document tab, easier to switch multiple open documents.

Hi,
is it possible to implement a editable PPM (boolean operation)?
For example, I have a PPM part (simular 2 cylinders) pipe.
If I put this in a other pipe, I have to explode both PPM's before I perform the boolean operation.
After this, it isn't possible to change one of them per values.
regards

That is something I would like too.
 The other wish I have with regards to ppms is  the ability to extrude or sweep a ppm profile - the same way you can extrude/sweep a block.

Replace GDI with GDI+?

More arc editing option like this

https://youtu.be/BbsxvV_Yp5o?t=30

More arc editing option like this

https://youtu.be/BbsxvV_Yp5o?t=30

We've got them.


Jeff

Quote from: Frederick Lm on January 09, 2019, 03:14:12 AM

More arc editing option like this

https://youtu.be/BbsxvV_Yp5o?t=30

We've got them.


Jeff

That is the AutoCAD Radius option, which TC have already. What is missing is the Stretch option.

I work with both 2D and 3D, I would like the middle mouse button set Dynamic Pan in 2D and set Dynamic Examine in 3D.

It will be perfect if middle mouse button Dynamic Pan and Dynamic Examine automatically swap when I Toggle 2D/3D dimension mode.

I'd like the Extract Entity function to be modified as shown in the attached image.

Minimally, the boundaries of the offset could be selectively chosen to go straight out from the selected face.  Ideally, the user would be able to set the angle up to ±90°.


Jeff

About Arc tool, I found other CAD packages have a type "Star / End / Direction", the "Start / End / Included" in TC is similar but "Included" is not a direction. Please add  "Star / End / Direction" in future update.

You might want to try the LTE tools that are available. They are in the "Draw" Command category. I don't use them, but made a custom sub-menu for them, just in case I want to experiment. Drag out the commands with the arrow ▶, it will bring all the commands to the menu.

I see, didn't aware to check Customize:Commands first.

Thanks so much!

Edit: I am using Default theme, I can drag the command from the Commands list to the menu and toolbar.

I also noticed that Start, End, Included actually could become the Stretch option for editing curve, as I discussed in post #106 http://forums.turbocad.com/index.php/topic,22868.msg141380.html#msg141380 in this thread.

Currently arc editing will move the arcs end points, I have to delete the arc and re-create if I want to edit the arc.