TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

join splines
Read 1758 times
* June 26, 2017, 01:05:12 PM
I have TurboCAD 2016 Designer 32-bit and want to use fill for an area enclose by a couple splines.  They were created using "Draw/Curve/Control Points".  I can group them but they aren't joined and thus fill won't work.


June 26, 2017, 02:57:08 PM
I don't have Designer, but what I would do is put each Spline in Edit mode so that I can see the Control Points.  After exiting Edit mode, I would then put Points (using the Vertex Snap function) at each of the Control Points.

From there, I would draw a new Spline hitting all the Points and be sure to Close to end drawing.


TC Pro Platinum 2020, 2019, 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1

* June 26, 2017, 02:58:08 PM
Select the group and press Ctrl+Shift+H. They don't have to be joined for that command to work. If you don't like the solid black fill that probably appears, click on the fill and then right-click to open the Local Menu. Select "Properties," go to the "Brush" page, and fiddle with the various options.

Henry H


June 26, 2017, 06:11:38 PM
You could use the Pick Point Hatching tool/command.  As long as the endpoints of the splines actually touch, thereby creating a closed area to create the Hatching.  The 2016 Comparison Chart on the Wiki shows Designer having that tool/command.
(example shown below in a non-looping animated .gif; click on it to start the animation)
« Last Edit: June 26, 2017, 06:14:36 PM by Alvin Gregorio »

Alvin Gregorio
Intermittent TurboCAD user since yr. 2000 (ver6.5).  No formal CAD Training.
---TurboCAD: V21PP; V20.2PP; V19DL; V11.2Pro; Windows-7-Pro/64-bit; Intel-Core-i3 CPU; 2.27ghz; 4GB RAM; Intel HD Graphics (CPU based)