TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Remember to do a search before you ask a question!!!

Arbor Press
Read 4805 times
* January 15, 2010, 09:26:56 PM
Just finish this one up.Lot fun to do.

W.D.

[attachment deleted by admin]
« Last Edit: January 16, 2010, 04:42:38 AM by wd »

Logged
Even a mistake may turn out to be the one thing necessary to a worthwhile achievement Henry Ford
If I have ever made any valuable discoveries it has been owing more to patient attention than to any other talent Isaac Newton
I have not failed Ive just found 10,000 ways that won't work Thomas Edison


January 15, 2010, 09:50:49 PM
#1
Nice job, is that your machine shop in the background?

Logged
BradE [ dean3Design ]
Core i7-3930K CPU @ 4.20GHz, 32GB 1333 DDR3, FirePro V5900
TC 21 Platinum (64-Bit) Running on Win7 Pro SP1


January 16, 2010, 05:26:59 AM
#2
Looks good W.D.

What does one do with an arbor press?


* January 16, 2010, 06:20:00 AM
#3
Hi Guys

Brad:
No. I choose that image because it gave off more background lighting compare to darker back ground image. On some occasions lighting would be darker on east side of the image. If compare to my can of Spam image you'll see the difference.Of course i could change light setting and location but i would be screwing around for hours getting the right light mood.I found that color composition and background plays more to the effect than always tweaking light sources IMO.I prefer to use Dimetric shot than Perspective shot it captures more of the image surroundings.Perspective is fine also but settings need to be set accordingly or it will leave off twisting affect.

Don: This tool can be used to press pins,small bushings,bearings into your project.I also cut internal keyways inside a bore of a bushing using specialize broach


Thanks for the look see!
W.D.

EDIT: I enclosed a video link that offers a Demo on a Arbor press.

http://www.youtube.com/watch?v=8tAz5YDFtAs
« Last Edit: January 18, 2010, 03:28:56 AM by wd »

Logged
Even a mistake may turn out to be the one thing necessary to a worthwhile achievement Henry Ford
If I have ever made any valuable discoveries it has been owing more to patient attention than to any other talent Isaac Newton
I have not failed Ive just found 10,000 ways that won't work Thomas Edison


* January 16, 2010, 09:36:36 AM
#4
Just finish this one up.Lot fun to do.

W.D.

Looks like fun. Handy gadget; always wished I could justify getting one ;-)

Henry H

Logged


* January 16, 2010, 09:40:00 AM
#5
Looks good W.D.

What does one do with an arbor press?

In addition to the uses listed by WD, Don, one presses arbors. Really.

http://en.wikipedia.org/wiki/Arbor_(tool)

Henry H

Logged


January 16, 2010, 12:58:27 PM
#6
That is very nice

Logged


* January 16, 2010, 11:49:49 PM
#7
Looks good, WD... this brings me on a few nice ideas.

This is the first time I see a manual press, most of the presses I see are air or oilpressure machines and way too expensive for personal use.

Thanks WD for that inspiration, keep up the good work :)

Logged


January 18, 2010, 02:39:36 AM
#8
Nice work WD, well done.

Marc

Logged
greetings from belgium (Pajottenland)
WIN 8.1/10 - x64
- TC 9 --> TC 16.2 / 52.0 pro Platinum
- AnimationLab 4.4 - MontageCenter 1.0
- CAM plug-in for v 16