TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
When posting a problem be sure to include which version you are using.  Give as much information as possible.  If the problem is with a specific file be sure to attache it to your post.

Slice by ?
Read 793 times
* July 22, 2016, 12:38:09 AM
If I use slice by polyline or another method, can I render one half to be shown in render mode and the other as non rendered?

Wanting to demonstrate a drawing as partial render and partial wire diagram.

Hope this makes sense.

Thanks

Darryl

Logged
Daz
TCW V21, 2015-2019 PP, Animation Lab V5.2 & Redsdk enabled, LightWorks rendering mostly.


* July 22, 2016, 01:46:05 AM
#1
would using 2 different shaped viewports with differing render modes not work?
« Last Edit: July 22, 2016, 01:51:53 AM by nikkipollard »

Logged
Nikki
TC20 platinum
TC 2015 platinum
TC 2017 with lightworks


* July 22, 2016, 06:58:24 AM
#2
If I use slice by polyline or another method, can I render one half to be shown in render mode and the other as non rendered?

Wanting to demonstrate a drawing as partial render and partial wire diagram.

Hope this makes sense.

Thanks

Darryl



Easy. Select the pieces you want rendered, click the Render button, wait for the screen to render, then hit ESC to de-select. See attached screenshot for an example.

Henry H

Logged