TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Remember to do a search before you ask a question!!!

Delete Fillet
Read 3181 times
* May 05, 2016, 03:38:24 PM
I have several counter top sections similar to the attached and would like to remove fillet edges on a few of them. What is the easiest way to do this? Thanks
« Last Edit: May 05, 2016, 03:53:54 PM by DonCW »

Logged
DonCW
2017 Pro with Light Works Plug in
2018 Platinum

Windows 10
There's so much to learn and not much time left to learn it.


* May 05, 2016, 03:55:13 PM
#1
quick pull tool maybe ?

Logged


May 05, 2016, 05:44:06 PM
#2
I have several counter top sections similar to the attached and would like to remove fillet edges on a few of them. What is the easiest way to do this? Thanks

Is that 2D Don?  Or a Sectional of a 3D model?

Either way, try to Fillet again, using 0 as the fillet radius.

Logged
Alvin Gregorio
(mostly Residential Architectural 2D; no formal CAD Training; intermittent TurboCAD user since yr. 2000 [ver6.5])
---TurboCAD: V21PP; V20.2PP; V19DL; V11.2Pro; Windows-7-Pro/64-bit; Intel-Core-i3 CPU; 2.27ghz; 4GB RAM; Intel HD Graphics (CPU based)


May 05, 2016, 05:50:54 PM
#3
If it's 3D, and you used the [3D] Fillet Edges Tool, and you have "Part Tree" (ACIS; Create Editing History) on, you can change the Fillet to 0 in the Part Tree in the Selection Info Pallet  [EDIT:  Better yet, we can "Suppress Operation" of the Fillet operation in the Part Tree].    (At least, I can, in version-20PP)

If it's 3D, and you used the [3D] Fillet Edges Tool, and you don't/didn't have the Part Tree activated, then I don't know how we change the filleted edges to 0.
« Last Edit: May 05, 2016, 05:54:46 PM by Alvin Gregorio »

Logged
Alvin Gregorio
(mostly Residential Architectural 2D; no formal CAD Training; intermittent TurboCAD user since yr. 2000 [ver6.5])
---TurboCAD: V21PP; V20.2PP; V19DL; V11.2Pro; Windows-7-Pro/64-bit; Intel-Core-i3 CPU; 2.27ghz; 4GB RAM; Intel HD Graphics (CPU based)


* May 05, 2016, 05:51:11 PM
#4
I have several counter top sections similar to the attached and would like to remove fillet edges on a few of them. What is the easiest way to do this? Thanks

Is that 2D Don?  Or a Sectional of a 3D model?

Either way, try to Fillet again, using 0 as the fillet radius.

It's 2D Alvin. Sorry for my poor explanation. I'll try your suggestion. Thanks.

Logged
DonCW
2017 Pro with Light Works Plug in
2018 Platinum

Windows 10
There's so much to learn and not much time left to learn it.


* May 05, 2016, 10:50:04 PM
#5
If it's 3D, and you used the [3D] Fillet Edges Tool, and you have "Part Tree" (ACIS; Create Editing History) on, you can change the Fillet to 0 in the Part Tree in the Selection Info Pallet  [EDIT:  Better yet, we can "Suppress Operation" of the Fillet operation in the Part Tree].    (At least, I can, in version-20PP)

If it's 3D, and you used the [3D] Fillet Edges Tool, and you don't/didn't have the Part Tree activated, then I don't know how we change the filleted edges to 0.

In Version 21 or later, use the Quick Pull Tool. Click on the fillet area, then move the cursor to increase/reduce the curvature or enter a Radius value in the Inspector Bar.
In Version 20 and earlier, use the Facet Edit tool to select and delete the fillets.

Logged
John R.

V17—V21, 2015—2019
Designer, Deluxe, (Professional, Expert, Basic), Platinum
RedSDK enabled
Windows 10 Pro (1903), 64-bit


* May 06, 2016, 08:42:18 AM
#6
I have several counter top sections similar to the attached and would like to remove fillet edges on a few of them. What is the easiest way to do this? Thanks

Is that 2D Don?  Or a Sectional of a 3D model?

Either way, try to Fillet again, using 0 as the fillet radius.

Thanks Alvin,

Setting the 2D Fillet value to 0 and redoing it worked great.
Have a great weekend.

Logged
DonCW
2017 Pro with Light Works Plug in
2018 Platinum

Windows 10
There's so much to learn and not much time left to learn it.


May 06, 2016, 04:38:13 PM
#7
...

Thanks Alvin,

Setting the 2D Fillet value to 0 and redoing it worked great.
Have a great weekend.

You're Welcome Don.
John R taught us that one a couple of years ago.

You enjoy your weekend as well Don.

Logged
Alvin Gregorio
(mostly Residential Architectural 2D; no formal CAD Training; intermittent TurboCAD user since yr. 2000 [ver6.5])
---TurboCAD: V21PP; V20.2PP; V19DL; V11.2Pro; Windows-7-Pro/64-bit; Intel-Core-i3 CPU; 2.27ghz; 4GB RAM; Intel HD Graphics (CPU based)


* May 06, 2016, 04:57:35 PM
#8
...

Thanks Alvin,

Setting the 2D Fillet value to 0 and redoing it worked great.
Have a great weekend.



You're Welcome Don.
John R taught us that one a couple of years ago.

You enjoy your weekend as well Don.

I will. :)
« Last Edit: May 06, 2016, 05:12:20 PM by DonCW »

Logged
DonCW
2017 Pro with Light Works Plug in
2018 Platinum

Windows 10
There's so much to learn and not much time left to learn it.