TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
When replying to a specific statement be sure to quote the previous post.

Cannot turn doors inside
Read 2770 times
* October 13, 2009, 01:47:06 PM
Hi all again,
I have problem wit creating doors.
I made wall with doors in it then I place another wall with different width that is connected with the first one in one point (they are in right angle). To do that I changed the reference of the wall to left.
When I am trying to create doors in the second wall, they are always opened to outside
On the first picture (creating doors) is situation just before my left click
On the second picture (created doors) is situation just after my left click

Can you give me some advice please?

Thank you

[attachment deleted by admin]

Logged


* October 13, 2009, 07:25:31 PM
#1
With the door highlighted click on 'Edit tool' in the Selection Info Palette. There'll be 4 options available on the inspector bar
Flip left - right or Flip inside - outside should the two to move the door to the required orientation.


HTH

Don

Logged
DonCW
2017 Pro with Light Works Plug in
2018 Platinum

Windows 10
There's so much to learn and not much time left to learn it.


* October 14, 2009, 01:09:16 PM
#2
As you can see on the first picture, the door position is corect just BEFORE i click to place it. But AFTER my click the doors place themself in totaly diferent position.
I just inserted the file with it, you can try it yourself. I am using TC 16 Pro .
Select doors, position them as on picture BEFORE and then just click. They will be placed like you can see on picture AFTER

[attachment deleted by admin]

Logged


* October 14, 2009, 01:59:51 PM
#3
I didn't have any problem placing the door the way you want. Seeing from your drawing that you're using Version 16.0.36.7, you may want to try the updated version, 16.1.47.5.

TurboCAD Professional 16.1 Patch


Logged
John R.

V17—V21, 2015—2019
Designer, Deluxe, (Professional, Expert, Basic), Platinum
RedSDK enabled
Windows 10 Pro (1903), 64-bit


* October 14, 2009, 03:37:28 PM
#4
I didn't have any problem placing the door the way you want. Seeing from your drawing that you're using Version 16.0.36.7, you

John,

how can you tell which version that drawing was made with.

Don

Logged
DonCW
2017 Pro with Light Works Plug in
2018 Platinum

Windows 10
There's so much to learn and not much time left to learn it.


* October 15, 2009, 12:54:58 AM
#5
re: How can you tell which version that drawing was made with?

Psychic!!  ;D

Wordpad.

[attachment deleted by admin]

Logged
John R.

V17—V21, 2015—2019
Designer, Deluxe, (Professional, Expert, Basic), Platinum
RedSDK enabled
Windows 10 Pro (1903), 64-bit


* October 15, 2009, 01:09:48 AM
#6
re: How can you tell which version that drawing was made with?

Psychic!!  ;D

Wordpad.

Thanks.!!!

Logged
DonCW
2017 Pro with Light Works Plug in
2018 Platinum

Windows 10
There's so much to learn and not much time left to learn it.


* October 15, 2009, 11:36:45 AM
#7
You was right, after update, doors are placed correctly, thank you.

Logged


* October 15, 2009, 03:03:18 PM
#8
You're welcome. :)

Logged
John R.

V17—V21, 2015—2019
Designer, Deluxe, (Professional, Expert, Basic), Platinum
RedSDK enabled
Windows 10 Pro (1903), 64-bit