TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
When posting a problem be sure to include which version you are using.  Give as much information as possible.  If the problem is with a specific file be sure to attache it to your post.

yellow Reference Point
Read 1208 times
* June 07, 2013, 05:04:37 PM
        
      Hello to All
                 I am selecting a part in TC 18.1 and on one part the yellow reference point is not showing up, only the four blue squares  are showing.
 Where is it .
Hilmar...

Logged


* June 07, 2013, 05:19:57 PM
#1
With the part still selected right mouse to open the Local Menu and select Default Reference Point. That should do it. The yellow reference point should re-locate it self to the centre of the highlited part.
« Last Edit: June 07, 2013, 06:08:36 PM by DonCW »

Logged
DonCW
2017 Pro with Light Works Plug in
2018 Platinum

Windows 10
There's so much to learn and not much time left to learn it.


* June 07, 2013, 07:07:19 PM
#2

   Yes,  thank You  Don C W
Hilmar

Logged


* June 07, 2013, 07:21:04 PM
#3
You're welcome.

Logged
DonCW
2017 Pro with Light Works Plug in
2018 Platinum

Windows 10
There's so much to learn and not much time left to learn it.