TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

SIP
Read 4933 times
January 20, 2013, 07:46:11 PM
I made this render for one of my US clients who always razzes me about living in the"North". He often calls me Nanook. Like New Jersey doesn't get snow! :-)


January 21, 2013, 02:19:40 AM
#1
Ha ha ha...well done!

Logged
The CAD man
Garry Wilson
Crips-CAD Creations
TC version 20 Pro Platinum + Animation Lab


January 21, 2013, 11:02:30 AM
#2
Like it Don.....it's freezing in the UK at the moment  :P

Logged
Daz…

V2019 Plat 64bit, Lenovo P72 Laptop, Window 10 Pro for Workstations, Intel Xeon E-2186 CPU @ 2.90 Ghz (6 cores/12 threads), 32GB RAM, 512GB & 1TB SSD's, Nvidia P5200 c/w Max=Q Design GPU, Display UHD 3840 x 2160 pixels
TurboCAD user since V3 and Turbocad 3D V1.


* January 21, 2013, 11:38:24 AM
#3
NIce one Don - just needs a chimney (need a fire to keep my fingers warn as they go numb quickly)

Andy

Logged


January 21, 2013, 11:48:20 AM
#4
Don,

having previously designed for properties using SIPs, I have to say that I'm a great SIPs fan.

And, I do like your design.  With a little development  these could have legs (sell like hot cakes!).  Remember Henry Ford?

Budget homes for all climates - cold or hot.  They could be mass produced and used anywhere from Alaska to the Sahara!
Ikea made a fortune with flat-packs, now is the time for curve-packs, delivered to your door and assembled in minutes/hours.

And Darrel is correct, it's f, f, f, f, freezing here in the UK.  Perhaps the cold has got to me?

Have an ice day, in your Igloo.  8)

Regards Tim

Logged
You can design without engineering, but you cannot engineer without design.
Using Win 10 with Designer 2016/2017 and TurboCAD Pro. Plat. 2018/2019 + Lightworks (64-bit versions) + AnimationLab 5.2.
Windows 10 Pro 1903 (Build 18362.418) 64-bit


January 21, 2013, 12:08:39 PM
#5
Great work Don!

Logged
Thanks!
Best regards,
Lars
www.lm-illustration.dk

(TurboCAD PRO PLATINUM v2018 64bit)


January 21, 2013, 02:51:24 PM
#6
And Darrel is correct, it's f, f, f, f, freezing here in the UK.

42 degrees Celsius (107.6 Fahrenheit) here in Adelaide Australia today...do your panels insulate against the heat and are they bushfire resistant as well?  We could sell them down here if they did!  ;D

Gaz

Logged
The CAD man
Garry Wilson
Crips-CAD Creations
TC version 20 Pro Platinum + Animation Lab


January 21, 2013, 03:12:42 PM
#7
Maybe we should all get together (team effort) and make this a reality. We can address all climate aspects. And if they don't sell we can each have one in our back yard as our own private man-cave.

Thanks for having a look!

BTW, I did get a response from my client. He said: "Well, you’ve got a standing job offer here in NJ – whenever you are ready to leave the insanity of Saskatoon, Saskatchewan. :-)" He has asked me a least a half dozen times to come work for him full-time. If I were 25 years younger I think I would. :-)


January 22, 2013, 02:20:09 AM
#8
Don

Why do you say "If I were 25 years younger I think I would."?

Is this because you wouldn't want to relocate??

Logged
Daz…

V2019 Plat 64bit, Lenovo P72 Laptop, Window 10 Pro for Workstations, Intel Xeon E-2186 CPU @ 2.90 Ghz (6 cores/12 threads), 32GB RAM, 512GB & 1TB SSD's, Nvidia P5200 c/w Max=Q Design GPU, Display UHD 3840 x 2160 pixels
TurboCAD user since V3 and Turbocad 3D V1.


January 22, 2013, 06:08:50 AM
#9
Don

Why do you say "If I were 25 years younger I think I would."?

Is this because you wouldn't want to relocate??

Yep. I am 52 and set in my ways. Not that that is terribly old but I don't think I would have the energy to make that kind of transition. On top of that my wife has medical needs that are taken care of here at no cost and I doubt we would find the same coverage if we went to the US. And, of course, I wouldn't go without her.


January 22, 2013, 08:05:54 AM
#10
Well I am 43 and catching you up Don  ;D

Yeah, I can see your point. There are many benefits of work for ourselves..... :)

Logged
Daz…

V2019 Plat 64bit, Lenovo P72 Laptop, Window 10 Pro for Workstations, Intel Xeon E-2186 CPU @ 2.90 Ghz (6 cores/12 threads), 32GB RAM, 512GB & 1TB SSD's, Nvidia P5200 c/w Max=Q Design GPU, Display UHD 3840 x 2160 pixels
TurboCAD user since V3 and Turbocad 3D V1.


* January 22, 2013, 08:40:55 AM
#11
Don I got you beat by 10 yrs, and if I were you I wouldn't move either. Health insureance here in the State is expensive. My wife also has health problems and I wouldn't go anywhere without her either. I think as we get older we just like to stay put. I could use that Igloo right now it's been in the single digits here the last few day. Carroll

Logged
Carroll D. Peppersack
TurboCad 14.2 Deluxe
TurboCad 20 Plat


* January 22, 2013, 12:07:59 PM
#12
Don - Don't even consider it. I left Joisey in 1956 and never looked back. Canadian west is god's country. When I was living in Alaska, near Fairbanks, people really did think we lived in Igloos. :o They couldn't believe we had an outdoor pool.

Ed

Logged
Rel 20 Pro Platinum


January 23, 2013, 10:09:28 AM
#13
That's a "cool" project Don.  ;D

Logged
BradE [ dean3Design ]
Core i7-3930K CPU @ 4.20GHz, 32GB 1333 DDR3, FirePro V5900
TC 21 Platinum (64-Bit) Running on Win7 Pro SP1


* January 24, 2013, 12:15:13 PM
#14
Nice job Don, I also like the interlocking design, as Tim said, If you could create them in a pack that would stack easily, you would sell loads especially in disaster areas.

Logged