TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
The purpose of these forums is to discuss TurboCAD.  Please keep the discussion of other products to compatibility issues or how the other software’s can be used with TurboCAD.


Roller
Read 5393 times
December 11, 2012, 07:45:03 PM
A simple animation made entirely in TurboCAD version 19 Pro + Animation Lab 5 plug.

http://youtu.be/QJrCOI9jx_0

Gaz
« Last Edit: December 16, 2012, 06:44:06 PM by The CAD man »

Logged
The CAD man
Garry Wilson
Crips-CAD Creations
TC version 20 Pro Platinum + Animation Lab


December 11, 2012, 09:17:44 PM
#1
Nice job on the animation Garry.


December 11, 2012, 10:50:22 PM
#2
Thanks Don,

I saw a similar model in one of the previous TC "samples" folder some years ago.  A friend wanted to know if it was possible to do animations in TC, so I built this model and animated it in a day (using "Cheke chrome" for the balls by the way), and another day to create the sound effects (my electric razor) and aligning them properly to the movie.

Gaz

Logged
The CAD man
Garry Wilson
Crips-CAD Creations
TC version 20 Pro Platinum + Animation Lab


* December 13, 2012, 01:55:36 AM
#3
nice work, I like the variation vou've applied with the balls rolling down the rails, maybe a background colour could show off the balls a bit more,

Is this the original one you meant http://www3.turbocadcommunity.com/tiki-browse_image.php?galleryId=6&sort_mode=created_desc&imageId=39&scalesize=o

Andy

Logged


December 13, 2012, 01:25:14 PM
#4
Yes Andy, that's the original I saw,and a background colour would have been a good idea.  I'm thinking of making the whole thing more complex.

Gaz

Logged
The CAD man
Garry Wilson
Crips-CAD Creations
TC version 20 Pro Platinum + Animation Lab


December 14, 2012, 06:01:21 AM
#5
A simple animation made entirely in TurboCAD version 19 Pro + Animation Lab 5 plug.

http://www.youtube.com/watch?v=yR_b06AjRuI&feature=plcp

Gaz

Great stuff Gaz.  Looking forward to the sequel.

Now, I wish you hadn't mentioned electric razors, as I haven't touched one of those in nearly fifty years . . . it's a long story!

Regards Tim

Logged
You can design without engineering, but you cannot engineer without design.
Using Win 10 with Designer 2016/2017 and TurboCAD Pro. Plat. 2018/2019 + Lightworks (64-bit versions) + AnimationLab 5.2.
Windows 10 Pro 1903 (Build 18362.476) 64-bit


December 16, 2012, 06:46:53 PM
#6

Now, I wish you hadn't mentioned electric razors, as I haven't touched one of those in nearly fifty years . . . it's a long story!


Intriguing!... The latest version can be viewed at:

http://youtu.be/QJrCOI9jx_0

Gaz

Logged
The CAD man
Garry Wilson
Crips-CAD Creations
TC version 20 Pro Platinum + Animation Lab


December 17, 2012, 01:36:27 AM
#7
Ex-cell-ent .... I like it!

Regards Tim
« Last Edit: December 18, 2012, 01:39:17 AM by Tim Stewart »

Logged
You can design without engineering, but you cannot engineer without design.
Using Win 10 with Designer 2016/2017 and TurboCAD Pro. Plat. 2018/2019 + Lightworks (64-bit versions) + AnimationLab 5.2.
Windows 10 Pro 1903 (Build 18362.476) 64-bit


* December 17, 2012, 10:00:11 AM
#8
Very impressive!!!  How you modeled/animated the "trampoline" scene has me a bit puzzled, it does not look easy.

Johnny

Logged
TurboCAD v19 Platinum - 64bit
Windows 7 Ultimate - 64bit
Intel i7 - x980 (3.33 GHz 6 duo-core)
12GB RAM, ATI 5570 w/1GB VRAM, 2TB 7200rpm HDD

Fast but not the fastest...


December 18, 2012, 12:42:22 AM
#9
Very impressive!!!  How you modeled/animated the "trampoline" scene has me a bit puzzled, it does not look easy.

Hi Johnny,
The flat trampoline mat was a 3D mesh (picture a, below) and the bottom one was an exact copy that had been pulled down at the centre (see picture b, below)
I made the top mesh the "actor" and told it to "morph" into the bottom one - which was hidden on a separate layer.
It then appears that the trampoline flexes down and back up again.
The ball is a separate "actor" following a spline "path"
The timing is not quite right...too slow and too fast at times, and there is a slight movement of the trampoline frame...but it shows the idea.

Gaz

Logged
The CAD man
Garry Wilson
Crips-CAD Creations
TC version 20 Pro Platinum + Animation Lab


* December 21, 2012, 06:33:28 PM
#10
I like the video Garry.Pretty cool animation 8)

Logged
Even a mistake may turn out to be the one thing necessary to a worthwhile achievement Henry Ford
If I have ever made any valuable discoveries it has been owing more to patient attention than to any other talent Isaac Newton
I have not failed Ive just found 10,000 ways that won't work Thomas Edison