TurboCAD Forums

Turbo Talk => General Discussion => Topic started by: rafter on April 26, 2018, 06:45:52 AM

Title: Saving as a DWG
Post by: rafter on April 26, 2018, 06:45:52 AM
Why does Turbocad 2017 Pro Plat not save architectural drawings as a DWG or a DXF all it does is crash the program. If I want to save it I have to take it to an older version.
   Myron
Title: Re: Saving as a DWG
Post by: Jeffin90620 on April 26, 2018, 06:17:11 PM
I have saved several drawings as DWG without crashing, but they didn't have Architectural features, so I created one.

I had no problems either Saving As DWG, or Open Dwg.  Both files are included here.

Only a few of the Architectural features were used.  I did not add a Slab, Roof Slab or Roof, let alone the second floor indicated by the stairs, so you should upload your own TCW file for us to experiment if you want to track down the cause of the problem.


Jeff
Title: Re: Saving as a DWG
Post by: nikkipollard on April 26, 2018, 10:15:59 PM
This hasn't happened to me for a while - with previous versions I found that moving the objects into a new drawing helped.
You could also try changing the version of dwg you are saving to.