TurboCAD Forums

Turbo Talk => Gallery => Topic started by: ARPI3D on November 12, 2015, 05:15:41 AM

Title: Hydraulic Press
Post by: ARPI3D on November 12, 2015, 05:15:41 AM
Long time without participating in this forum. This is a Hydraulic Press. It was built some years ago but I decided to revisit this project and I rendered all the images in TC17.2 Pro using LW. I used the free graphics software Gimp to gather all the images in just one and to show the internal part of the oil deposit. I hope you enjoy it.
Title: Re: Hydraulic Press
Post by: Tim Stewart on November 12, 2015, 06:41:10 AM
Hi,

yes, impressive, and, thanks for posting.  8)

Regards Tim
Title: Re: Hydraulic Press
Post by: Henry Hubich on November 12, 2015, 07:52:28 AM
Great job.

Henry H
Title: Re: Hydraulic Press
Post by: DonCW on November 12, 2015, 10:04:35 AM
Excellent work.
Title: Re: Hydraulic Press
Post by: Orion20036 on November 12, 2015, 05:02:09 PM
Excellent model and render, I like the paint material also as very often paint turns out too flat or too glossy and this paint job is just perfect.
Title: Re: Hydraulic Press
Post by: Andy H on November 13, 2015, 04:05:37 AM
Very nice work, I agree with Michael the material came out really well.

Can I ask, should the three images be different, or did you just post one and the forum software duplicated them.
Title: Re: Hydraulic Press
Post by: ARPI3D on November 20, 2015, 06:51:29 AM
Hi Andy,
The three images are equal. When I tried to upload them, I was a little confused with the process as a result three images were uploaded instead of only one
I appreciate all your comments!