TurboCAD Forums

Turbo Talk => Problems => Topic started by: snevelb on June 01, 2015, 09:51:18 AM

Title: Hidden Lines
Post by: snevelb on June 01, 2015, 09:51:18 AM
I have Turbocad 19 Deluxe. When working in 3d I know how to hide or not hide lines in model view.  When I create a viewport and put the drawing in paper view the hidden lines always show.  When I create a pdf the hidden lines always show.  It doesn't matter whether I am suppressing the hidden lines or not when I create these. Is there someway when creating pdf or paper view that I can continue to hide the lines?  Thank you.
Title: Re: Hidden Lines
Post by: Torfinn on June 01, 2015, 12:37:16 PM
In paperspace, select the viewport, go to "Camera" in the Selection Info palette and set it to Hidden, you may also go down to "Render" and make sure it stand on "Hidden Line/ Hidden Line"

Torfinn
Title: Re: Hidden Lines
Post by: snevelb on June 04, 2015, 06:30:32 PM
Thank you. This worked perfectly
Title: Re: Hidden Lines
Post by: RetEng on November 11, 2019, 08:51:12 AM
I'm having a similar issue, using TC Deluxe 2018.  Lines that should be hidden are showing up in my paper space views of objects. 

I have tried the suggestions in this thread, but still the hidden lines are showing.

Example in the attached file is paper space titled "Rear cross upper", where a hole through the part should be hidden, but instead shows up in the left hand view.

Any additional suggestions?

Thanks!
Title: Re: Hidden Lines
Post by: Torfinn on November 11, 2019, 11:04:00 AM
Inside the Render section you have checked Nonrendable Objects, click on that and take away the checkmark should solve your problem, both viewports have that, but on rigth side it don't matter in this case because of the viewdirection
I open it in Platinum 2018

Torfinn
Title: Re: Hidden Lines
Post by: RetEng on November 11, 2019, 03:12:53 PM
Thanks for the suggestion.  I must not be understanding correctly, as when I uncheck the "Non Renderable Objects" button, the entire image goes away.

Am I misinterpreting, or is there something additional I need to change?

Thanks!
Title: Re: Hidden Lines
Post by: Jeffin90620 on November 11, 2019, 03:42:26 PM
Thanks for the suggestion.  I must not be understanding correctly, as when I uncheck the "Non Renderable Objects" button, the entire image goes away.

Am I misinterpreting, or is there something additional I need to change?

Nonrenderable objects are 2D (lines, squares, circles, etc.) that have no thickness.  Turning off their display makes them invisible in Hidden Line, Draft, Quality and Advanced rendering modes.


Jeff
Title: Re: Hidden Lines
Post by: RetEng on November 11, 2019, 05:09:40 PM
I believe I found my problem.  I had an error in some of my solid object, making then appear transparent.  I rebuilt the models of the parts which were showing  hidden lines as visible, and now the hidden lines are properly not visible in my paper space views.
Thanks again for your assistance!