TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
When posting a problem be sure to include which version you are using.  Give as much information as possible.  If the problem is with a specific file be sure to attache it to your post.

Solar System Demo
Read 10059 times
July 21, 2009, 09:07:44 AM
Shows some of the basics of animation lab in a simple model.

http://downloads.imsidesign.com/Flash/animation-lab-demo/SolarSys.htm
« Last Edit: April 24, 2012, 02:11:41 PM by turbotech »

Logged
Rip Fowler
IMSIDesign LLC


July 21, 2009, 09:50:19 AM
#1
Very nicely done, Rip. Is that your voice? Whoever it is, is a natural - and the speed of delivery is right on.

Only one thing I wasn't too keen on was the examine selection at the end because it was too busy and didn't allow all the other animation you created to stand out. Perhaps selecting orbit for the final would have been a better choice. I know, it is easy to be an armchair critic, but that is my 2.


July 21, 2009, 12:52:07 PM
#2

Nice RIP.  Any help, for animationlab, is most welcome.

Question:

Is there an upgrade now available for v4.4, allowing use with TC v16.1?

Could you please email me a download link, if there is?

Many thanks.

Regards Tim

Logged
You can design without engineering, but you cannot engineer without design.
Testing/using with Win 10 and various TurboCAD 64-bit versions.


July 21, 2009, 01:24:04 PM
#3
Quote
Very nicely done, Rip. Is that your voice? Whoever it is, is a natural - and the speed of delivery is right on.

Only one thing I wasn't too keen on was the examine selection at the end because it was too busy and didn't allow all the other animation you created to stand out. Perhaps selecting orbit for the final would have been a better choice. I know, it is easy to be an armchair critic, but that is my 2.

Thanks for the feedback Don.  That is indeed my voice.  I agree that the end is a little chaotic.

Quote
Nice RIP.  Any help, for animationlab, is most welcome.

Question:

Is there an upgrade now available for v4.4, allowing use with TC v16.1?

Could you please email me a download link, if there is?

Tim check your e-mail I sent the link.

Logged
Rip Fowler
IMSIDesign LLC


July 21, 2009, 02:14:22 PM
#4

Nice RIP.  Any help, for animationlab, is most welcome.

Question:

Is there an upgrade now available for v4.4, allowing use with TC v16.1?

Could you please email me a download link, if there is?
[/quote]

Tim check your e-mail I sent the link.
[/quote]

Many thanks RIP

Regards Tim

Logged
You can design without engineering, but you cannot engineer without design.
Testing/using with Win 10 and various TurboCAD 64-bit versions.


* November 21, 2009, 07:00:27 AM
#5
This just blows me away! Hard to believe this is a Scratch project. Looks great a couple of layer problems (Scratch Team should really redo the whole z order model). Amazing!




_________________
Call Center Software

Logged


November 22, 2009, 12:07:03 AM
#6
Looks good. AnimationLab, is this an addon to TC or is it in the Pro version?

Forget it! Took another read of the forum and answered my own question.
« Last Edit: November 22, 2009, 12:08:45 AM by Steve The Kiwi »

Logged
TC2015 Pro Platinum.
TurboCad V21 Pro Platinum 64 bit. TurboCad V21 Pro Platinum 32 bit CADCAM.
TurboCAD 2015 ProPlat.
TurboCAD LTE/DoubleCAD Pro V7.
TurboCAD Deluxe V21 64 bit.
VISI 21 CADCAM
Christchurch, Middle Earth.


November 23, 2009, 08:22:42 AM
#7
Taking forever to load...gave up after several tries.

Logged
Hardware: 2.67GHz Core I7-920, 18GB 1333 DDR3, Nvidia Gforce GT 220
OS: 64 Bit Windows 10 Home
Software: TC 24.0.26.3 (64)
Setup: UI: Classic, Editing History: Off, Use Choice: Off, Native Draw: GDI


* November 23, 2009, 07:01:34 PM
#8
Which TCad version and which AniLab version, Rip?

Henry H

Logged


November 23, 2009, 11:04:20 PM
#9
Works OK at 1:15 AM  ;D

Logged
Hardware: 2.67GHz Core I7-920, 18GB 1333 DDR3, Nvidia Gforce GT 220
OS: 64 Bit Windows 10 Home
Software: TC 24.0.26.3 (64)
Setup: UI: Classic, Editing History: Off, Use Choice: Off, Native Draw: GDI


November 24, 2009, 08:27:33 AM
#10
Which TCad version and which AniLab version, Rip?

Henry H
16 and 4.4 I originally made this video for when the new anilab was released.

Logged
Rip Fowler
IMSIDesign LLC


November 25, 2009, 06:48:03 AM
#11
Hi Rip,

Is there a new update for AnimationLab 4.4 for TC 16.2 ?
If so, where can I download it ?

Marc

Logged
greetings from belgium (Pajottenland)
XP pro - SP3 - 4GB ram
- TC 16.2 / 52.0 pro Platinum
- AnimationLab 4.4 - MontageCenter 1.0
- CAM plug-in for v 16


November 25, 2009, 09:38:50 AM
#12
Hi Rip,

Is there a new update for AnimationLab 4.4 for TC 16.2 ?
If so, where can I download it ?

Marc

4.4 is the latest and greatest.  If you have 4.2 send me an e-mail.

support@imsidesign.com

Logged
Rip Fowler
IMSIDesign LLC


December 17, 2009, 01:03:29 PM
#13
Hallo,

I did this tutorial with one sphere and one circle. When I clicked the play scenario button, TC said to me, that I have to save first the file. I did this, and then  once more play scenario. The movie was played in a small frame and the circle and sphere rotated itself around itself. What did I wrong.

Rudl

Logged