TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

The purpose of these forums is to discuss TurboCAD.  Please keep the discussion of other products to compatibility issues or how the other software’s can be used with TurboCAD.

Image Wrap
Read 2542 times
* July 19, 2009, 08:17:55 PM
I am trying to wrap the attached label, but so far I can't get the proper settings.  Any help pointing me in the right direction would be appreciated.



[attachment deleted by admin]


* July 19, 2009, 08:25:27 PM
Please post the image, too, Don: molson bottle label.jpg

Henry H


* July 19, 2009, 08:33:13 PM
Okay Henry, here's the label.

[attachment deleted by admin]
« Last Edit: July 19, 2009, 09:17:06 PM by Don C Wensrich »


July 19, 2009, 09:53:48 PM
Okay Henry, here's the label.

You will need a flat label and mask to do a proper job. I found some larger res components on the net and made some others in Photoshop for you.

I set your bottle upright, created a cylinder to wrap the label. I shelled the cylinder and sliced it in half. Moved it onto the bottle. There is an extra cylinder in the file.

[attachment deleted by admin]

* July 20, 2009, 05:17:42 AM
Thanks Don,

I'll have a look at it tonight.



August 12, 2009, 09:21:07 AM
Hi Don,
Would it be possible for you to post that example in TC 14 format.

I am trying to wrap an image against a cylinder and can't figure out where I am going wrong.

Thanks in advance


Dave C
TC Pro V14.2 - TC 21 Platinum 64 Bit Build 22.3
Intel i-4770K 3.5GHz
120GB ssd 2TB hd
16GB memory
64bit Windows 7 Pro