TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

Master's New Voice
Read 2582 times
August 01, 2010, 11:01:37 PM
I finally cleared it up and got it to render. Had a little trouble not crashing with 1 of the webs. It started as a ice sculpture in SecondLife. This model is the second stage. Next is to have it cut into a crystal.

Hope you enjoy it as much as I enjoyed making it.
Moose

Logged
Moose


August 02, 2010, 02:16:09 AM
#1
Looks good, but shouldn't the dog's head tilt to one side?   ;)

I am curious... what will you use to cut the crystal?

Jeff

Logged
TC Pro Platinum 2017, 2016 & 2015 (all with LightWorks) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1


* August 02, 2010, 06:40:47 AM
#2
I think Mr.Sarnoff would enjoyed this one too.It was pleasure too see.

Logged
Even a mistake may turn out to be the one thing necessary to a worthwhile achievement Henry Ford
If I have ever made any valuable discoveries it has been owing more to patient attention than to any other talent Isaac Newton
I have not failed Ive just found 10,000 ways that won't work Thomas Edison


August 02, 2010, 06:48:44 AM
#3
That is pretty cool, Amos - and nicely done. Lots of elements in there.

I had to smile too, as I created an old style phonograph back in 2006 and it got used on the cover of a swiss music book in the same manner as you show (with the robotic dog) See: http://www.amazon.de/Elemente-Musikinformatik-Guerino-Mazzola/dp/3764377453 if you wish.
« Last Edit: August 02, 2010, 06:51:13 AM by Don Cheke »

Logged


* August 02, 2010, 01:59:41 PM
#4
That's great, Moose.

Henry H

Logged


August 02, 2010, 05:00:53 PM
#5
Thanks guys.

I looked at that book cover, Don. The wife ask if the author played SecondLife and saw my ice sculpture. I think I made it originally around 06. Your gramophone look a lot more detailed than mine. ;)


Here is the model with no background. I think some elements are a bit too subtle with the background.

Logged
Moose


August 03, 2010, 08:15:04 PM
#6
Very cool Amos!

Logged
BradE [ dean3Design ]
Core i7-3930K CPU @ 4.20GHz, 32GB 1333 DDR3, FirePro V5900
TC 21 Platinum (64-Bit) Running on Win7 Pro SP1


August 20, 2010, 03:42:22 PM
#7
I'm very happy today. I received an image today of the test cutting. It was cut into a 50mm x 50mm x 80mm block. The picture was taken from the "back" of the model, so some details can't be seen. Laser Xpressions did a fine job.

http://www.laserxpressions.com/3d-crystal-portraits.html

Logged
Moose


August 20, 2010, 03:53:25 PM
#8
Very nice Amos.........beautiful work......

Daz

Logged
Daz...
V2016 64-Bit & 32 Bit Platinum Edition - Build 61.2
RedSDK Only in 64 bit & 32 bit = RedSDK & Lightworks
TurboCAD user since V3 and Turbocad 3D V1.
OS Windows7 Pro 64bit Lenovo W701 Laptop, 12GB Ram, 2 x 128 SSD harddrives, NVIDIA Quadro FX 2800M Graphics, Intel i7 CPU...


August 20, 2010, 03:58:27 PM
#9
That is really neat Amos. I'll bet you're happy. :)

Logged
BradE [ dean3Design ]
Core i7-3930K CPU @ 4.20GHz, 32GB 1333 DDR3, FirePro V5900
TC 21 Platinum (64-Bit) Running on Win7 Pro SP1


* August 20, 2010, 06:13:50 PM
#10
Amos

What formats do use laserxpressions.com use? e.g.dxf.dwg.etc.

Thanks
W.D.

Logged
Even a mistake may turn out to be the one thing necessary to a worthwhile achievement Henry Ford
If I have ever made any valuable discoveries it has been owing more to patient attention than to any other talent Isaac Newton
I have not failed Ive just found 10,000 ways that won't work Thomas Edison


August 20, 2010, 09:57:31 PM
#11
The model had to be converted to a textured obj file.
I used Accutrans3D 30 day trial. There is a post, "Converting TC to .obj file type" in General with a link.

Logged
Moose