TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
All posts discussing pricing or where to buy TurboCAD will be deleted.

Moving Through Compartments
Read 580 times
* July 02, 2019, 10:09:09 PM
As I move from compartment to compartment ( steering -> auxillary -> main machine room etc ) via doors or hatches Im just wondering if its gunna look crappy if I use transition images with popup text that tells the user/viewer that they are now entering another compartment of an internal space, ( say when the camera goes from a specific location to a new location )??
see the attached image

The transition image is most likely gunna be text on a suitable background, the primary purpose is to allow me to stop and start the rendering at particular points so that I can then render the new section as distinct from the previous section ( read compartment ).

Still got more work todo and to buy a new pc for rendering.

Logged
Daz
TCW V21, 2016-2019 PP, Animation Lab V5 & LightWorks rendering mostly.


July 03, 2019, 04:06:29 AM
#1
What are you using for video editing software?  Almost all of them allow you to cross-fade during a transition.  Make that transition slow (and maybe out of focus) and put the text over it.


Jeff

Logged
TC Pro Platinum 2019, 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1


* July 03, 2019, 02:57:01 PM
#2
Movavi v16 sstill dont know if its good enough yet as Ive so little with it. Crossfade seems like the most logical answer.

Logged
Daz
TCW V21, 2016-2019 PP, Animation Lab V5 & LightWorks rendering mostly.


July 04, 2019, 12:03:03 AM
#3
Daz,

there are so many ways to do this, which are effective.
As long as you don't overdo the effects, they can be very helpful.
Movie Maker, comes free with Windows, and has many such transitions.
Take a look, it maybe all you need.

Regards Tim

Logged
You can design without engineering, but you cannot engineer without design.
Using Win 10 with Designer 2017 and TurboCAD Pro. Plat. 2016/2017/2018 + Lightworks (64-bit versions) + AnimationLab.


* July 04, 2019, 12:06:42 AM
#4
Thanks Tim I didnt know that windows has its own movie maker will take a look.

Logged
Daz
TCW V21, 2016-2019 PP, Animation Lab V5 & LightWorks rendering mostly.


July 04, 2019, 12:31:50 AM
#5
Thanks Tim I didnt know that windows has its own movie maker will take a look.

It may struggle with very large files, but worth a try.
It's a basic video editing program but is fairly easy for beginners.   ;)

Regards Tim

Logged
You can design without engineering, but you cannot engineer without design.
Using Win 10 with Designer 2017 and TurboCAD Pro. Plat. 2016/2017/2018 + Lightworks (64-bit versions) + AnimationLab.