TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
All posts discussing pricing or where to buy TurboCAD will be deleted.

Locking work plane - step files
Read 334 times
July 10, 2018, 03:16:52 PM
Hi,

Is it possible to lock the workplane in one orientation.

Also I am working for a client who has given me step files done in solidworks. I need to manipulate and return.

Should I convert to TC and work on or just work on in step format (only thing different seems to be the sizing e.g automatically comes as imperial).

After trying to save I get this error (see attached) -  I managed to save under the .STP type, however this made file go from 7mb to 32mb ???

Thanks
Brett
« Last Edit: July 10, 2018, 03:36:48 PM by exdraftee »

Logged
FerrariDrafting (Find me on Facebook)
Australia
V16 deluxe
v17 plat
v19 plat
V20 Plat
V21 Plat
TC2016 plat


* July 10, 2018, 09:27:14 PM
#1
The error message is a  new one for me, but the single reason to use .stp is for neutral file transfer, that's all it's good for, 'keeping' files in that format is no benefit and wastes TC's smarts. Save copy as .stp when you need to pass it on to a non-TC user.

Logged


July 11, 2018, 10:59:43 PM
#2
Thanks Murray,

Problem is it goes from about 16 mb to 32 mb with just a straight save.

Cheers
Brett

Logged
FerrariDrafting (Find me on Facebook)
Australia
V16 deluxe
v17 plat
v19 plat
V20 Plat
V21 Plat
TC2016 plat


* July 12, 2018, 03:59:00 PM
#3
Unless it's causing a noticeable performance hit, a material difference to the file's manageability, that's pretty much academic.  I use pretty low-spec 2-in-1 tablets some of the time, and even they handle that sort of file without a noticeable difference to something up to 20Mb.  Does it take a noticeably longer time to load or import? 

Logged


July 12, 2018, 04:44:59 PM
#4
Hi,

Its more that I am exchanging files to China and I am limited to email attachments.

Thanks
Brett

Logged
FerrariDrafting (Find me on Facebook)
Australia
V16 deluxe
v17 plat
v19 plat
V20 Plat
V21 Plat
TC2016 plat


* July 12, 2018, 09:06:08 PM
#5
I use hjsplit file splitter for exactly that, dating back to when we used floppies and 1.44Mb  (oh god I got old.  when did that happen?).  Not as convenient as dropbox, onedrive or ftp host, but a realistic solution to your problem.   

Logged


July 13, 2018, 05:23:46 PM
#6
... I managed to save under the .STP type, however this made file go from 7mb to 32mb ???

TurboCAD's TCW format is Binary; the STEP format is ASCII (very inefficient).

Use Windows' built in archiver to compress the STEP file into a ZIP archive; it will reduce in size by 80% (approximately).


Jeff

Logged
TC Pro Platinum 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1