TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

Launch for 1779
Read 480 times
* June 19, 2018, 08:37:10 AM
Here is a model of 29' Launch of 1779 developed for a ship model forum.  I started in TC 2017 but switched to TC19 in order to use Lightworks.  For most rendering I am wandering in the woods, so I had to stick with something I had used before.

I find the shape of the bow to be an unending challenge on this model and others.

Wayne


Logged


* June 19, 2018, 08:39:56 AM
#1
That's a great job of modeling, Wayne.

Henry H

Logged


* June 19, 2018, 12:03:43 PM
#2
Very nice work. its got good looking curvature.

Logged


June 20, 2018, 08:02:04 PM
#3
That's really quite something Wayne. Great job!


June 21, 2018, 12:55:36 AM
#4
Nice work!

Logged
TC2015 Pro Platinum.
TurboCad V21 Pro Platinum 64 bit. TurboCad V21 Pro Platinum 32 bit CADCAM.
TurboCAD 2015 ProPlat.
TurboCAD LTE/DoubleCAD Pro V7.
TurboCAD Deluxe V21 64 bit.
VISI 21 CADCAM
Christchurch, Middle Earth.


June 22, 2018, 11:44:42 AM
#5
Beauty! Yeah, pointy ends can be a real problem.

Logged
RMc____
In preparing for battle, planning is essential, but plans are useless . . . Dwight David Eisenhower
v 19.2 Pro Platinum 64 bit
v 14.2 Pro
Turbo Floor Plan Pro v 15
Windows 10 x 64 Home


June 27, 2018, 01:25:14 PM
#6
Nicely done.

What's your next step?


Jeff

Logged
TC Pro Platinum 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1


* July 07, 2018, 03:41:21 PM
#7
A fine piece of work indeed!

Logged
Nigel.

On TC Deluxe 19: hobby use.