TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Remember to do a search before you ask a question!!!

Suggestions for TC2019?
Read 7869 times
* December 31, 2018, 08:11:03 PM
Keyshot rendering integration would be awesome.

https://www.youtube.com/watch?v=taFGq2Qhr60

Here is how the keyshot works with solid works:
https://www.youtube.com/watch?v=v9w7gZCNnBk

+1 for KeyShot integration

Also I'd like to see document tab, easier to switch multiple open documents.

Logged
TurboCAD Pro Platinum 2018 64-bit


* January 01, 2019, 11:06:33 AM
Hi,
is it possible to implement a editable PPM (boolean operation)?
For example, I have a PPM part (simular 2 cylinders) pipe.
If I put this in a other pipe, I have to explode both PPM's before I perform the boolean operation.
After this, it isn't possible to change one of them per values.
regards

Logged
Turbocad 2018 Platinum [Germany]


* January 01, 2019, 10:40:07 PM
That is something I would like too.
 The other wish I have with regards to ppms is  the ability to extrude or sweep a ppm profile - the same way you can extrude/sweep a block.

Logged
Nikki
TC20 platinum
TC 2015 platinum
TC 2017 with lightworks


* January 03, 2019, 01:22:23 AM
Replace GDI with GDI+?

Logged
TurboCAD Pro Platinum 2018 64-bit


* January 09, 2019, 03:14:12 AM
More arc editing option like this

https://youtu.be/BbsxvV_Yp5o?t=30

Logged
TurboCAD Pro Platinum 2018 64-bit


January 09, 2019, 05:38:24 AM

Logged
TC Pro Platinum 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1


* January 09, 2019, 05:43:20 AM
More arc editing option like this

https://youtu.be/BbsxvV_Yp5o?t=30

We've got them.


Jeff


That is the AutoCAD Radius option, which TC have already. What is missing is the Stretch option.

Logged
TurboCAD Pro Platinum 2018 64-bit


* January 14, 2019, 06:06:13 AM
I work with both 2D and 3D, I would like the middle mouse button set Dynamic Pan in 2D and set Dynamic Examine in 3D.

It will be perfect if middle mouse button Dynamic Pan and Dynamic Examine automatically swap when I Toggle 2D/3D dimension mode.
« Last Edit: January 14, 2019, 06:09:40 AM by Frederick Lm »

Logged
TurboCAD Pro Platinum 2018 64-bit


January 19, 2019, 04:47:50 PM
I'd like the Extract Entity function to be modified as shown in the attached image.

Minimally, the boundaries of the offset could be selectively chosen to go straight out from the selected face.  Ideally, the user would be able to set the angle up to ±90°.


Jeff


Logged
TC Pro Platinum 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1


* January 21, 2019, 06:46:52 AM
About Arc tool, I found other CAD packages have a type "Star / End / Direction", the "Start / End / Included" in TC is similar but "Included" is not a direction. Please add  "Star / End / Direction" in future update.

Logged
TurboCAD Pro Platinum 2018 64-bit


* January 21, 2019, 08:44:34 AM
You might want to try the LTE tools that are available. They are in the "Draw" Command category. I don't use them, but made a custom sub-menu for them, just in case I want to experiment. Drag out the commands with the arrow ▶, it will bring all the commands to the menu.
« Last Edit: January 21, 2019, 08:49:24 AM by John R »

Logged
John R.

V17—V21, 2015—2018
Designer, Deluxe, Expert, Basic, Platinum
RedSDK enabled
Windows 10, 64-bit


* January 21, 2019, 06:19:01 PM
I see, didn't aware to check Customize:Commands first.

Thanks so much!

Edit: I am using Default theme, I can drag the command from the Commands list to the menu and toolbar.

I also noticed that Start, End, Included actually could become the Stretch option for editing curve, as I discussed in post #106 http://forums.turbocad.com/index.php/topic,22868.msg141380.html#msg141380 in this thread.

Currently arc editing will move the arcs end points, I have to delete the arc and re-create if I want to edit the arc.
« Last Edit: January 21, 2019, 06:36:18 PM by Frederick Lm »

Logged
TurboCAD Pro Platinum 2018 64-bit