TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Remember to do a search before you ask a question!!!

Making a Mould / Design / Experience
Read 517 times
* April 25, 2018, 04:35:12 PM
Investigating the requirements for a making, designing a mould using aluminium for one of the frames from my designs, does anyone have experience in the design or using?

Got a designed hand truck frame that needs to be created by a mould process, just looking for anyone with knowledge here.


Logged
Thanks Daz
TCW V21, 2016 & 2017 PP, Animation Lab V5, Graficalc, TCMap, TurboPDF V2-V3 & Lightworks mostly
Windows 10 Home ed. i7 @ 3400Ghz, 16GB, Nvidia 960GTX 4GB ram, 2TB HD, 500GB SSD & 128GB SSD

Good better best
Never let it rest
Until your good is better
And your better is best


* April 25, 2018, 06:34:20 PM
#1
Don't try to design the mold yourself; leave that to the foundry. Design the part so that it can be cast, preferably consulting with the foundry during the design process. I've had some experience designing cast parts.

Henry H
« Last Edit: April 25, 2018, 06:36:40 PM by Henry Hubich »

Logged


April 25, 2018, 11:16:47 PM
#2
I agree with Henry on this.  Foundries that accept CAD files have advanced software that will alter the model so that it has the preferred draft angles on the vertical surfaces best suited for their manufacturing processes.

Even if they don't accept CAD files (I had to produce PDF files for a foundry in China because that was all they accepted), they still produced the products per the customer's needs because they know what they're doing.


Jeff

Logged
TC Pro Platinum 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1


* April 26, 2018, 12:58:39 AM
#3
Henry thanks for those tips and Jeff and thanks for your tips as well. Just examining the best way forward here as the designs can be fabricated 3 alternate ways and the idea for cast molded parts has just come up.

Logged
Thanks Daz
TCW V21, 2016 & 2017 PP, Animation Lab V5, Graficalc, TCMap, TurboPDF V2-V3 & Lightworks mostly
Windows 10 Home ed. i7 @ 3400Ghz, 16GB, Nvidia 960GTX 4GB ram, 2TB HD, 500GB SSD & 128GB SSD

Good better best
Never let it rest
Until your good is better
And your better is best


April 26, 2018, 02:25:03 AM
#4
Daz,

good to hear you're making progress.
Fabrication is far more cost-effective, and adaptable, for a small number of units.
Generally, in my experience, casting in aluminium is cheaper for larger production runs.
Depending on complexity, you might also produce your own patterns/moulds?
You'll need to check your costings carefully.  ;)

All the best.

Regards Tim

Logged
You can design without engineering, but you cannot engineer without design.
Using Win 10 with Designer 2017 and TurboCAD Pro. Plat. 2016/2017/2018 + Lightworks (64-bit versions).


* April 26, 2018, 04:51:24 PM
#5
Tim thanks to yourself and others for their support here with TurboCAD, I could not have done it on my own. Even my design renders that I post to linkedin have improved dramatically. Got two companies that are now building these designs for testing and evaluation and hoping that they get across the line and go into formal production. Theyre just fabricating the same way I did with early designs and if all goes well then its most likely that casting and molding will be the desired way to build.

Logged
Thanks Daz
TCW V21, 2016 & 2017 PP, Animation Lab V5, Graficalc, TCMap, TurboPDF V2-V3 & Lightworks mostly
Windows 10 Home ed. i7 @ 3400Ghz, 16GB, Nvidia 960GTX 4GB ram, 2TB HD, 500GB SSD & 128GB SSD

Good better best
Never let it rest
Until your good is better
And your better is best