TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

Display with less resolution on curve edge.
Read 133 times
* April 24, 2018, 08:00:57 AM
With 'revolve', I create a 3d object (red arrow), based on 2d object (blue arrow).
However, I wish to display it on layout sheet with 'drafting', as the edge blue arrow pointed. That is, not so many curve lines as the red arrow pointed.
I checked with the properties of 'Suppress tangency lines', 'Suppress hidden tangency lines only', and Curve segments amount', but they seems not relevant.

Could anyone please help?
Thanks in advance.

Best Regards
Simon

Logged
=================
Yuansheng Tsai
[email protected]

Windows 7 Pro
TurboCAD 2015 Professional 64-bit - Platinum Edition
Version: 22.0     Build: 15.4


* April 24, 2018, 08:53:54 AM
#1
One possible cause of the unwanted lines is that the rounded corners of the profile have been exploded into a collection of line segments (as with the right-hand object in the attached screenshot). Try redrawing the profile.

Henry H

Logged


* April 25, 2018, 07:57:59 AM
#2
Thank you, Henry.
You are right. Due to some reason, it had been converted to line segments, as I can also see many edit points on the curve/arc when switch the object to 'edit mode' with 'edit tool'.
Fixed with re-draw.

Thanks~
Best Regards
Simon

Logged
=================
Yuansheng Tsai
[email protected]

Windows 7 Pro
TurboCAD 2015 Professional 64-bit - Platinum Edition
Version: 22.0     Build: 15.4