TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
When posting a problem be sure to include which version you are using.  Give as much information as possible.  If the problem is with a specific file be sure to attache it to your post.

Brass Cannon
Read 204 times
* April 17, 2018, 04:02:50 PM
Just found the image the other day, a cannon built in my RAN days from old turbocad plans from the mid 90s.

Logged
Thanks Daz
TCW V21, 2016 & 2017 PP, Animation Lab V5, Graficalc, TCMap, TurboPDF V2-V3 & Lightworks mostly
Windows 10 Home ed. i7 @ 3400Ghz, 16GB, Nvidia 960GTX 4GB ram, 2TB HD, 500GB SSD & 128GB SSD

Good better best
Never let it rest
Until your good is better
And your better is best


* April 17, 2018, 05:54:00 PM
#1
Beautiful.

Henry H

Logged


April 19, 2018, 06:35:18 PM
#2
I've just spent too much time staring at it to figure out if it's real or rendered.  :o


Jeff

Logged
TC Pro Platinum 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1


* April 21, 2018, 02:32:29 PM
#3
That's a picture Jeff of a momento I built and presented to an RAN officer who retired after 20 years service. The base is from a 4.5" canon shell, brass canon turned on a lathe with a west Australian jarrah hard wood.

Logged
Thanks Daz
TCW V21, 2016 & 2017 PP, Animation Lab V5, Graficalc, TCMap, TurboPDF V2-V3 & Lightworks mostly
Windows 10 Home ed. i7 @ 3400Ghz, 16GB, Nvidia 960GTX 4GB ram, 2TB HD, 500GB SSD & 128GB SSD

Good better best
Never let it rest
Until your good is better
And your better is best