TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

TurboCad 2018 LightWorks
Read 1078 times
* March 19, 2018, 05:29:19 AM
I've just noted that there are suggestions on UK sites and South African sites that LightWorks is returning to the latest version of TurboCad and that RedSDK will now be the optional plug-in. Can anyone confirm this?

Have there been any other announcements made in regards to the new features available in TurboCad Pro Plat 2018?

Thanks


 

Logged
Steve

TurboCAD 2018 Pro Platinum 64-bit (V25 build 43.5)

TurboCAD 2016 Pro Platinum 64-bit (build 57.2)
Lightwoks Plug-in

TurboCAD 2015 Pro Platinum 64-bit (build 90.0)
LightWorks Plug-in
Intel i7 2600k CPU @3.40 GHz 3.70GHz 8.00 GB RAM GeForce GTX 750 Ti 2GB
Windows 7 64-Bit


* March 19, 2018, 05:51:42 AM
#1
There was a link in this tread that worked earlier
http://forums.turbocad.com/index.php/topic,22400.0.html

But if it still work i dont know

Torfinn

Logged
V18, V19, V20, V21, 2015/ 16/ 17/ 18 Pro. Platinum
Deluxe V20, V21, 2015/ 16/ 17
RedSDK enabled
Windows 10 Home Premium 64 bit, 32 GB
NVIDIA Geforce GTX 780m, 1 GB


* March 19, 2018, 10:58:09 AM
#2
re: …But if it still work, I don't know.…

This is what a registered visitor now sees:
An Error Has Occurred!
The topic or board you are looking for appears to be either missing or off limits to you.

Logged
John R.

V17—V21, 2015—2018
Designer, Deluxe, Expert, Basic, Platinum
RedSDK enabled, except in 2018
Windows 10, 64-bit


* April 04, 2018, 06:38:57 AM
#3
There was a link in this tread that worked earlier
http://forums.turbocad.com/index.php/topic,22400.0.html

But if it still work i dont know

Torfinn

Thanks Torfinn & John, the link is back up again. It seems to confirm Lightworks has returned and will be an integral part of TC 2018. RedSDK will now be the plug-in.

At first glance I also like the (1) 'Audit System' feature to pick up bad objects in a drawing and (2) Status Bar Memory Display Update and (3) Isolate the object option.

Not a final list of new features but interesting.

Steve

Logged
Steve

TurboCAD 2018 Pro Platinum 64-bit (V25 build 43.5)

TurboCAD 2016 Pro Platinum 64-bit (build 57.2)
Lightwoks Plug-in

TurboCAD 2015 Pro Platinum 64-bit (build 90.0)
LightWorks Plug-in
Intel i7 2600k CPU @3.40 GHz 3.70GHz 8.00 GB RAM GeForce GTX 750 Ti 2GB
Windows 7 64-Bit


* April 04, 2018, 02:09:43 PM
#4

Logged
Robert Burgess. Using Platinum 21 - Windows 7
Australia


* April 06, 2018, 02:31:00 PM
#5
Woohoo!  Exploded HL viewports are a new feature again! Deja viewport...
« Last Edit: April 06, 2018, 04:33:32 PM by murray dickinson »

Logged