TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

3D Subtract not on toolbar Boolean & Facet
Read 430 times
February 18, 2018, 04:01:07 PM
The Boolean & Facet Toolbar does not have 3D Subtract but it has all the others. I can get 3D subtract by going to Modify>3D Boolean Operations>3D Subtract. But this is inconvenient.

Logged
Erik


* February 18, 2018, 04:12:23 PM
#1
Have you try'd to re-load your cfg ?
Customize> Options>> Load from
Else open Customize> Commands, find the tool and just drag it over to the toolbar and then save the cfg you use.

Torfinn

Logged
V18, V19, V20, V21, 2015/ 16/ 17/ 18 Pro. Platinum
Deluxe V20, V21, 2015/ 16/ 17
RedSDK enabled
Windows 10 Home Premium 64 bit, 32 GB
NVIDIA Geforce GTX 780m, 1 GB


February 19, 2018, 12:15:43 PM
#2
Thanks Torfinn you helped a lot. What I finally did was View>Toolbars>Customize screen pops up>click Commands Tab>In categories>3DBooleanOperations>In commands screen drag 3D subraact to displayed tool bar. Works great except there is no screen tip on the toolbar for subtract. I can live with it. What is cfg? And where do you find it to load and save it? I have searched the TurboCad Basic Training Index and find no mention of what to do.
Erik

Logged
Erik


* February 19, 2018, 12:30:12 PM
#3
Hi Erik

Good it works out for you, the cfg is my name of the User Interface, so guess i should remember to not use that word on it :)
You will find the load from and save in, in Customize/ Options.
After you have made some change you like to keep in how the worplace look like when it comes to where you place the different Tools to your like etc., go there and in the Save in section just overwrite the name with something that make sence for you and you will see that it turns up on the left side aswell, then you can select and re load it if needed at a later time.
Next time TC will ask you if you want to change it and then you click ok if you want to.

Torfinn

Logged
V18, V19, V20, V21, 2015/ 16/ 17/ 18 Pro. Platinum
Deluxe V20, V21, 2015/ 16/ 17
RedSDK enabled
Windows 10 Home Premium 64 bit, 32 GB
NVIDIA Geforce GTX 780m, 1 GB