TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
All posts discussing pricing or where to buy TurboCAD will be deleted.

Esc and delete keys not working - TC Deluxe 20.0 64 bit
Read 678 times
* February 03, 2018, 05:24:52 AM
Hi all,

For some reason the delete keys and esc have stopped working in TC 20 deluxe 64 bit. I can use the edit->cut from the drop downs but it's cumbersome.

Does anyone have a fix for this?

Many thanks

Phil

Logged


* February 03, 2018, 05:43:29 AM
#1
You could try to re-load your cfg if you have a cuztomized cfg, else the one of standard's that you use, if that not work, use the Default, save, close and reopen TC, then try load your preferred cfg again.
If it's not ok, then i think you need to use default and re build it.
You will find the cfg's in Customize/ Options

Another thing to try is to delete the Built-in or do a Repair, NB! TC should be closed if you try this.

Torfinn

Logged
V18, V19, V20, V21, 2015/ 16/ 17/ 18 Pro. Platinum
Deluxe V20, V21, 2015/ 16/ 17
RedSDK enabled
Windows 10 Home Premium 64 bit, 32 GB
NVIDIA Geforce GTX 780m, 1 GB


February 03, 2018, 06:21:41 AM
#2
Phil,

    do these keys work okay, in other programs?
    Just a thought.

Regards Tim

Logged
You can design without engineering, but you cannot engineer without design.
Using Win 10 with Designer 2017 and TurboCAD Pro. Plat. 2016/2017/2018 + Lightworks (64-bit versions).


* June 05, 2018, 07:55:06 AM
#3
Had the same problem.  Went into Tools/customize & under the keyboard tab, I noticed that the delete function was not selected for the Del key.  I re assigned it & it worked.  I don't have a CLUE why it changed though...

Logged


* June 05, 2018, 09:51:01 AM
#4
Had the same problem.  Went into Tools/customize & under the keyboard tab, I noticed that the delete function was not selected for the Del key.  I re assigned it & it worked.  I don't have a CLUE why it changed though...

If you chose the "Delete" command from the Keyboard "All Commands" list, that is for deleting the Active Paperspace. You want the second "Selection" command for deleting selected objects.

Logged
John R.

V17—V21, 2015—2018
Designer, Deluxe, Expert, Basic, Platinum
RedSDK enabled, except in 2018
Windows 10, 64-bit