TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Remember to do a search before you ask a question!!!

Image always comes to the front
Read 405 times
* January 10, 2018, 09:28:48 AM
I have a model and an image.
Whichever direction I view it the image is always in front, even when I spin dynamically it goes round so far then image to the front again.
Thanks folks

Logged


* January 10, 2018, 01:13:48 PM
#1
I have a model and an image.
Whichever direction I view it the image is always in front, even when I spin dynamically it goes round so far then image to the front again.
Thanks folks

I suggest trying using Layer Order.  Assign a lower Layer Order to the "Images" (or otherwise appropriately named) Layer than the other Layers. (or vise-versa-- the "Images" Layer(s) Order can be 0, and all the others something higher).

I think that'd have the best chance of working to attend to what you are describing.  -Alvin
« Last Edit: January 10, 2018, 01:15:58 PM by Alvin Gregorio »

Logged
Alvin Gregorio
(mostly Residential Architectural 2D; no formal CAD Training; intermittent TurboCAD user since yr. 2000 [ver6.5])
---TurboCAD: V20.2PP(57.0)[as of 3/12/15]; V19DL(54.2); V11.2Pro; Windows-7-Pro/64-bit; Intel-Core-i3 CPU; 2.27ghz; 4GB RAM; Intel HD Graphics (CPU based)


January 10, 2018, 02:26:02 PM
#2
Select the image, press the Shift + Page Down on the keyboard to move the image down - under the lines.


* January 11, 2018, 03:01:54 PM
#3
Thanks folks that helped

Logged