TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
All posts discussing pricing or where to buy TurboCAD will be deleted.

Zoom Indicator Value
Read 1052 times
* January 04, 2018, 04:46:21 AM
How can I change the apparent default values of the Zoom Indicator at the bottom right of the Modelspace screen to even values like 40%, 60%, 100% etc?

Logged


* January 04, 2018, 05:06:18 AM
#1
How can I change the apparent default values of the Zoom Indicator at the bottom right of the Modelspace screen to even values like 40%, 60%, 100% etc?

Zoom indicator value can  change through mouse wheel scrolling.
We can not enter input zoom indicator value.In 2018 build this improvement will implement.

Logged
Rahama Shahad
SQAE
IMSI Design


* January 04, 2018, 08:18:47 AM
#2
How can I change the apparent default values of the Zoom Indicator at the bottom right of the Modelspace screen to even values like 40%, 60%, 100% etc?

What version are you using?

In 2017 there is a "zoom factor' in the 'advanced preferences"
If
Current zoom is @ 12%
Target zoom is 100%
Set 'zoom factor" @ 8.333333
Click once on the "zoom in" tool icon.

If
Current zoom is @ 100%
Target zoom is 20%
Set "zoom factor" @ 5
Click once on the "zoom out" tool icon
« Last Edit: January 04, 2018, 08:21:14 AM by Dean »

Logged
"What do I know, I'm still learning"..
Windows 7 64 bit HP > on a stock HP laptop with 4gb-2.4 GHz.Turbocad 2018-2017, TurboCad Platinum 21.Using Lightworks and Redsdk, Anilab lab 5. ATI Mobility Radeon HD 4500/5100


* January 04, 2018, 09:19:45 AM
#3
I have my "Zoom / Printed Size" set with "1" as its hotkey. This will zoom the drawing to 100%. From there I'll move the cursor out of the drawing area and use the +/- numeric keys to zoom in/out. As Dean shows, the "Zoom Factor" can make difference on the amount of zoom for each plus/minus movement.

Logged
John R.

V17—V21, 2015—2018
Designer, Deluxe, Expert, Basic, Platinum
RedSDK enabled, except in 2018
Windows 10, 64-bit


* August 29, 2018, 11:57:01 PM
#4
To Rahama, Dean and John R,
My apologies for not acknowledging your help for so many months.
By some fluke I actually found the method that JohnR proposed - so as I had a solution I promptly forgot to refer back the the Forum.
Sorry, 

Logged