TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

Dave Taylor has taken a new position
Read 1852 times
* August 21, 2017, 11:17:39 AM

I wanted to let you know that last Thursday was Dave's last day here as an IMSI employee.  Dave is going to moving into a very different but somewhat related field, working at an electrical contracting firm here in Marin.   As part of his new position, he will be creating CAD drawings, so will continue to be an active TurboCAD user.

Dave's roles of TurboCAD Forum moderator and Beta User coordinator will be taken over by Rob Berry, so there should be no disruption in the level or quality of the support you have come to expect from Dave.

While I can't speak for Dave, I am confident you will continue to see him make postings to the TurboCAD Forum.


August 21, 2017, 11:22:41 AM
Sorry to see you go Dave, especially just when I rejoin the company. I know that you are excited about your new position and wish you all the luck in your new endeavor.
« Last Edit: August 21, 2017, 11:40:12 AM by Robert Berry »

Robert Berry
Direct: (707) 634-7753
Skype: 17076347753
Email:  rberry (at) imsidesign (dot) com

* August 21, 2017, 11:23:09 AM
Good luck Dave.  ;)

I'm guessing that the Wednesday Webinar's are still up in the air.

John R.

V17—V21, 2015—2018
Designer, Deluxe, Expert, Basic, Platinum
RedSDK enabled
Windows 10, 64-bit

* August 21, 2017, 01:10:23 PM
Best of luck to you, Dave. We'll all miss you.

...And hello again, Rob Berry. It'll be good working with you again.

Henry H


* August 21, 2017, 01:29:48 PM
All the best Dave.

And Hi to Rob. 


August 21, 2017, 01:54:44 PM
Thanks for letting us know Bob.

Sorry to hear you are leaving Dave, end of an era, Best of luck in your new job...

Hi Rob and welcome back...

V2017 64-Bit & 32 Bit Platinum Edition
RedSDK Only in 64 bit & 32 bit = RedSDK & Lightworks
TurboCAD user since V3 and Turbocad 3D V1.
OS Windows7 Pro 64bit Lenovo W701 Laptop, 24GB Ram, 2 x 128 SSD harddrives, NVIDIA Quadro FX 2800M Graphics, Intel i7 CPU...

* August 22, 2017, 01:55:26 AM
Good luck Dave.


TurboCAD Pro 2016, TurboCAD Pro 2017
Laptop Asus i7 6500U, dual-core 2,50GHz, NVIDIA GeForce GTX 950M, RAM 12 GB, SSD 480GB
Windows 10 64 bit

August 22, 2017, 02:15:20 AM
Best of luck, Dave.

Thanks for all the assistance you've provided.


TC Pro Platinum 2018, 2017, 2016 & 2015 (all with LightWorks & RedSDK) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1

August 23, 2017, 05:01:45 AM
You will be missed, Dave. Best wishes for your new work.  :)



* August 23, 2017, 12:16:30 PM
Best of luck, Dave!
Thank you for all your wonderful work with TurboCad.

"What do I know, I'm still learning"..
Windows 7 64 bit HP > on a stock HP laptop with 4gb-2.4 GHz.Turbocad 2018-2017, TurboCad Platinum 21.Using Lightworks and Redsdk, Anilab lab 5. ATI Mobility Radeon HD 4500/5100