TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

SEKE assignments
Read 818 times
* January 12, 2017, 06:06:31 PM
I wish they would do something about the disappearing SEKE's assignments.

Easy to get back but very annoying to have to reset all the time.

Matthew

Logged
Just a hobby user.
TurboCAD Vr. 18.2 Platinum
TurboCAD Vr. 2015 Platinum
TurboCAD Vr. 2016 Platinum
PC - Intel i7, 3.2 GHz, 32GB RAM, Window 10 64bit
Graphics ATI Radeon HD 5700 Series, 1GB RAM


* January 13, 2017, 07:44:58 AM
#1
You must have done something to annoy the TurboCAD genie. I've never had that particular problem -- not yet, anyway.

Henry H

Logged


* January 13, 2017, 06:13:58 PM
#2
Maybe genie got offended when I complained it was taking to long to open a file.. :)   (A 14" x 7.75" x 1" plate with four thru holes and four threaded holes in 3D)

This problem really only became an annoyance in 2016 version.  The other versions I've had once I set up work space and saved under a new name it didn't occur again.

Possible cause for it, if I save the file and close TC right after.  It might be that I need to save file, close file, close TC in that order.

They still need to fix it, especially since there's posts that show up often enough because this has happened.

Matthew

Logged
Just a hobby user.
TurboCAD Vr. 18.2 Platinum
TurboCAD Vr. 2015 Platinum
TurboCAD Vr. 2016 Platinum
PC - Intel i7, 3.2 GHz, 32GB RAM, Window 10 64bit
Graphics ATI Radeon HD 5700 Series, 1GB RAM


* January 18, 2017, 01:24:01 PM
#3
I had SEKEs disappear in 2015 during an occasional session.  Occasionally, randomly, not always, not mostly, just sometimes.  SEKEs are restored when TC's restarted.  Happened with any file, not a particular one, hasn't happened to me at all in 2016, not even with 2015 files continued in the newer version.   
« Last Edit: January 18, 2017, 01:25:53 PM by murray dickinson »

Logged


January 29, 2017, 04:08:51 PM
#4
I frequently have drop-down menu items ghost on me.  Saving, closing and re-opening the file always brings them back (assuming I should have them un-ghosted), but it shouldn't happen in the first place.

I have proposed a program modification that would allow the TurboCAD data structure to be saved in its entirety so that it could be compared with a saved-and-reloaded file.

Another solution would be to monitor the state of any selected command(s) to see when they transition from active to ghosted.


Jeff

Logged
TC Pro Platinum 2017, 2016 & 2015 (all with LightWorks) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1